Make sure this part fits

GM 19330062
Torsion Bar, Front Driver Side

2001-2007 GM

Customer Questions & Expert Answers (8)
GM 19330062 Torsion Bar, Front Driver Side
  • Part Description
    Bar, Front Torsion
  • Position
    Front Driver Side
  • Replaces
    15732338
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2001-2007 Chevrolet Silverado 1500Base, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicLS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2001-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    2001-2007 Chevrolet Silverado 2500 HDBase, LS, LT, LTZ, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 2500 HD ClassicLS, LT, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2001-2006 Chevrolet Silverado 3500Base, LS, LT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 3500 ClassicLS, LT, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 3500 HDLT, LTZ, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19330062 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19330062 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step after installing the adjustment bolt and adjuster nut for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Remove the J 36202, releasing the tension on the torsion bar until the load is taken up by the adjustment bolt, then remove the safety stands, lower the vehicle, and measure the Z height. Adjust the adjustment bolt clockwise to increase or counterclockwise to decrease the Z height.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Torsion Bar
    Q:
    What should be done after raising the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Remove both torsion bars.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Torsion Bar
    Q:
    What is the next step after securing the torsion bars for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Install the upper link mounting nuts and bolts, tightening the nut to 95 Nm (70 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Torsion Bar
    Q:
    How do you remove the bushing from the bracket for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Use a bushing driver (or equivalent) to remove the bushing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Torsion Bar
    Q:
    What should be repeated for MN8, MT1, and MW3 for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Repeat the installation of the adjustment bolt and adjuster nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Torsion Bar
    Q:
    What is the final step in removing the torsion bar for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Remove the crossmember from the crossmember mount and take out the torsion bar from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Torsion Bar
    Q:
    What is the final step before lowering for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Remove the safety stands.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Torsion Bar
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Torsion Bar, Front Driver Side 19330062 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19330062 Torsion Bar, Front Driver Side is available in the market under the name GM Torsion Bar. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19330062 Torsion Bar, Front Driver Side fits certain Chevrolet Silverado 1500, Silverado 2500 HD, Silverado 2500 models, as well as GMC Sierra 1500, Sierra 2500 HD, Sierra 2500 models.
The original GM component designated by manufacturer part number 19330062 maintains top performance when functioning as the Bar, Front Torsion unit at its Front Driver Side. The component 19330062 is constructed from durable material and its dimensions span 55.2 x 2.1 x 2.1 inches while weighing 25.90 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Bar, Front Chassis. The part 19330062 has available replacement options 15732338. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.