Make sure this part fits

GM 93742707
Bearing Set

2004-2008 GM

Customer Questions & Expert Answers (5)
GM 93742707 Bearing Set
GM 93742707 Bearing Set
  • Part Description
    Bearing Kit, Connecting Rod; Rod Bearing
  • Replaces
    93742276
  • Manufacturer
    General Motors
Make sure this part fits
$34.18 MSRP: $53.54
You Save: $19.36 (37%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number93742707
    Part DescriptionBearing Kit, Connecting Rod; Rod Bearing
    Other NamesBearing Kit, Engine Connecting Rod
    Item Dimensions3.7 x 2.7 x 1.4 inches
    Item Weight0.50 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces93742276
    ManufacturerGeneral Motors
    SKU93742707
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2008 Chevrolet AveoBase, LS, LT, Special Value4 Cyl 1.6 L GAS
    2007-2008 Chevrolet Aveo5LS, Special Value4 Cyl 1.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Hey, is 93742707 a good match for my vehicle? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 93742707 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the rod bearing on Chevrolet Aveo? Posted by Customer
    A:
    To replace the Piston, connecting rod, and bearing, one is required to assemble the required tools: piston pin remover/installer set ( J 24086-B ), angle meter ( J 45059 ), and angular torque gage ( KM-470-B ). First, remove the Cylinder Head and manifolds for intake and exhaust, then the Oil Pan and oil suction pipe bolts to disconnect the oil suction pipe. Move the Piston to the bottom of the stroke and place a mark on the connecting rod cap for its position and remove the connecting rod cap bolts, cap, and lower connecting Rod Bearing. Then, remove the upper Piston connecting Rod Bearing and ridge ream the cylinder wall not to scratch it with sharp worn Piston rings. Depress the Piston and then apply the Piston Ring expander tool to expand and remove the Piston rings. Remove the Piston pin from the Piston and connecting rod by using the Piston pin remover/installer set (J 24086-B) and remove the Piston from the connecting rod. Align the notch of the Piston and the connecting rod to install the Piston pin guide, grease the Piston pin with clean oil, and feed it into the assembly using the Piston pin remover/installer set (J 24086-B). Choose new Piston rings, measure and adjust necessary the Piston Ring gap, and the assembly of Piston oil rings and compression rings in order. Space the oil ring gaps and apply clean engine oil to the cylinder wall and Piston Ring. Begin with a ring compressor and place a wood handle, then perform the installation of the Piston to the lower connecting rod end to avoid damaging the crankshaft journal. Mount the connecting rod cap and bearings then tighten connecting Rod Bearing cap bolts to 25 n.m (18 lb ft.) and further with the angle meter (J 45059) to an additional 30 degrees plus 15 degrees. Finally retighten the oil suction pipe and bolts to 10 n.m (89 lb in), retighten the pan and the Cylinder Head with intake and exhaust manifolds.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you prepare the piston rings for installation for the 2008 Chevrolet Aveo? Posted by Customer
    A:
    Select new piston rings, measure the piston ring gap with a feeler gauge, and adjust as necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Rod Bearing
    Q:
    What should be done after removing the cylinder head for the 2006 Chevrolet Aveo? Posted by Customer
    A:
    Remove the oil pan and oil suction pipe bolts to take out the oil suction pipe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Rod Bearing
    Q:
    How should the piston be positioned before removing the connecting rod cap for the 2004 Chevrolet Aveo? Posted by Customer
    A:
    Move the piston to the bottom of its stroke.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Rod Bearing
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 93742707, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 93742707 Bearing Set. It is sometimes referred to as GM Rod Bearing. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 93742707 Bearing Set. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery