Make sure this part fits

GM 89025855
Lap & Shoulder Belt

2003-2007 GM

Customer Questions & Expert Answers (11)
GM 89025855 Lap & Shoulder Belt
  • Part Description
    Belt Kit, Passenger Seat (Retractor Side) *Medium Pewter *Pewter
  • Position
    Passenger Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2007 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicLS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2003-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L GAS
    2003-2007 Chevrolet Silverado 2500 HDBase, LS, LT, LTZ, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 2500 HD ClassicLS, LT, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2003-2006 Chevrolet Silverado 3500Base, LS, LT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 3500 ClassicLS, LT, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 3500 HDLT, LTZ, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 89025855 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 89025855 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after installing the bolt to the seat belt anchor for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Install the nut to the seat belt retractor and tighten it to 52 N.m (38 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What should be done if there is doubt about the condition of the seat belt system for the 2005 Chevrolet Silverado 1500? Posted by Customer
    A:
    It should also be replaced.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the first step to replace the center front seat belt for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Remove the center front seat belt latch bolt and take out the seat belt latch assembly from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    Does this replacement requirement apply to child restraints for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Yes, it includes systems used by adults as well as those securing child restraints, infant carriers, and booster seats.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    Is replacement necessary after minor collisions where no automatic restraint device was deployed for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Replacement may not be necessary unless parts are visibly damaged.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the first step in removing the center front seat belt for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Remove the center front seat belt latch bolt and detach the seat belt latch assembly from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What must be done to seat belt systems involved in serious collisions for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    They must be replaced if the collision was serious enough to deploy automatic restraint devices.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the next step after installing the seat belt buckle assembly for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Install the seat belt latch assembly to the center front seat and secure it with the seat belt latch bolt, also tightening it to 53 N.m (39 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the first step to ensure safety when replacing the center rear seat belt for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Use only the specified seat belt components from the GM parts catalog and confirm that the seat belt latch is fully seated in the buckle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What should be checked after installation for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Ensure that the seat belt latch is fully seated in the buckle and retained until purposely released.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lap & Shoulder Belt 89025855 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 89025855 Lap & Shoulder Belt is available in the market under the name GM Seat Belt. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 89025855 Lap & Shoulder Belt fits certain Chevrolet Silverado 1500, Silverado 2500 HD, Silverado 2500 models, as well as GMC Sierra 1500, Sierra 2500 HD, Sierra 2500 models.
The original GM component designated by manufacturer part number 89025855 maintains top performance when functioning as the Belt Kit, Passenger Seat (Retractor Side) *Medium Pewter *Pewter unit at its Passenger Side. The component 89025855 is constructed from durable material and its dimensions span 29.4 x 7.1 x 5.8 inches while weighing 4.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Belt & Retractor; A95 - Front Bucket Seat; An3 - Front Bucket Seat; Ae7 - Front Split Bench. The part 89025855 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.