Make sure this part fits

GM 25749805
Strut Bracket

2006-2011 GM

Customer Questions & Expert Answers (20)
GM 25749805 Strut Bracket
  • Part Description
    Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number25749805
    Part DescriptionBracket, Engine Mounting; Engine Mount Bracket; Motor Mount
    Other NamesStrut Mount Bracket
    Item Dimensions13.5 x 8.5 x 2.5 inches
    Item Weight2.00 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU25749805
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2011 Buick LucerneCX, CXL, CXL Special Edition, CXS, Super6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
    2006-2011 Cadillac DTSBase, Livery, Luxury, Platinum, Premium8 Cyl 4.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25749805 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25749805 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the rear engine mount for the 2006 Buick Lucerne? Posted by Customer
    A:
    Remove the right front wheel and tire.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after positioning the engine mount bracket for the 2006 Buick Lucerne? Posted by Customer
    A:
    Install the engine mount bracket bolts, tightening them to 50 Nm (37 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be placed under the oil pan before removing the engine mount for the 2008 Buick Lucerne? Posted by Customer
    A:
    A suitable adjustable jack and a block of wood.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the torque specification for the engine mount bracket bolts for the 2007 Buick Lucerne? Posted by Customer
    A:
    70 N.m (52 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the final step after completing the installation for the 2007 Buick Lucerne? Posted by Customer
    A:
    Remove the adjustable jack and block of wood from under the transaxle oil pan and reinstall the right front wheel and tire.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the next step after removing the engine mount bracket bolts for the 2006 Buick Lucerne? Posted by Customer
    A:
    Take out the engine mount bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the first step to replace the front engine mount bracket for the 2007 Buick Lucerne? Posted by Customer
    A:
    First, remove the engine mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the first step to replace the right engine mount bracket for the 2009 Cadillac DTS? Posted by Customer
    A:
    First, remove the right engine mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be done after inserting the right engine mount stud for the 2009 Cadillac DTS? Posted by Customer
    A:
    Reinstall the right engine mount to engine mount bracket nut and tighten it to 80 Nm (59 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after removing the right engine mount for the 2010 Cadillac DTS? Posted by Customer
    A:
    Detach the right engine mount bracket from the engine stud and the transaxle bolts, then take out the right engine mount bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be done after removing the right engine mount for the 2008 Cadillac DTS? Posted by Customer
    A:
    Detach the right engine mount bracket from the engine stud and the transaxle bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    How do you install the front engine mount for the 2008 Cadillac DTS? Posted by Customer
    A:
    Insert the front engine mount stud through the hole in the front engine mount bracket and install the front engine mount bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be adhered to during this process for the 2007 Cadillac DTS? Posted by Customer
    A:
    It is important to adhere to the Fastener Notice.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after tightening the transaxle brace bolt for the 2006 Cadillac DTS? Posted by Customer
    A:
    Tighten the lower engine mount bracket to engine stud nuts to the same torque specification.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be adhered to during installation for the 2006 Cadillac DTS? Posted by Customer
    A:
    The Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be removed after the right engine mount for the 2007 Cadillac DTS? Posted by Customer
    A:
    Remove the right engine mount bracket to engine stud and the right engine mount bracket to transaxle bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the first step to replace the engine front mount for the 2009 Cadillac DTS? Posted by Customer
    A:
    First, remove the engine mount bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the first step in the installation process for the 2009 Cadillac DTS? Posted by Customer
    A:
    Place the lower engine mount bracket onto the engine studs.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the torque specification for securing the front engine mount for the 2010 Cadillac DTS? Posted by Customer
    A:
    Tighten it to 80 Nm (59 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 25749805, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 25749805 Strut Bracket. It is sometimes referred to as GM Engine Mount, GM Engine Mount Bracket. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 25749805 Strut Bracket. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Cadillac parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery