Make sure this part fits

GM 22645683
Lower Control Arm Bushing, Front

1995-2005 GM

Customer Questions & Expert Answers (7)
GM 22645683 Lower Control Arm Bushing, Front
  • Part Description
    Bushing, Front Lower Control Arm; Control Arm Bushing; Axle Pivot Bushing
  • Position
    Front Lower
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number22645683
    Part DescriptionBushing, Front Lower Control Arm; Control Arm Bushing; Axle Pivot Bushing
    Other NamesLower Control Arm Front Bushing; Bushings; Bushing, Steering Knuckle Lower Control Arm
    Item Dimensions2.4 x 1.8 x 1.7 inches
    Item Weight0.60 Pounds
    PositionFront Lower
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU22645683
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1995-2005 Chevrolet CavalierBase, LS, LS Sport, RS, Z244 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
    1999-2004 Oldsmobile AleroGL, GLS, GX4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.4 L GAS
    1999-2005 Pontiac Grand AmGT, GT1, SE, SE1, SE24 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.4 L GAS
    1995-2005 Pontiac SunfireBase, GT, SE4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 22645683 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 22645683 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What are the last steps to complete the repair for the 2000 Chevrolet Cavalier? Posted by Customer
    A:
    Connect the brake hoses to the rear axle, install the tire and wheel assemblies, lower the vehicle, and tighten the control arm nuts to 120 Nm (52 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm Bushing
    Q:
    What is the next step after disconnecting the brake hoses and wheel speed sensor harness for the 2001 Chevrolet Cavalier? Posted by Customer
    A:
    Remove the bolts, washers, and nuts from the control arm, and rotate the control arm downward to access the bushings.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm Bushing
    Q:
    What should be done after tightening the Nut (J21474-18) for the 2001 Chevrolet Cavalier? Posted by Customer
    A:
    Disassemble the tools after the front bushing is removed from the control arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm Bushing
    Q:
    What is the final step in the process for the 2004 Chevrolet Cavalier? Posted by Customer
    A:
    Install the tire and wheel assemblies, lower the vehicle, and tighten the control arm nuts to 120 N.m (52 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm Bushing
    Q:
    What tools are needed for the rear bushing removal for the 2003 Chevrolet Cavalier? Posted by Customer
    A:
    Nut (J 21474-27), the remover/installer from (J 41211), the receiver from (J 41211), and Nut (J 21474-4).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm Bushing
    Q:
    How do you remove the bushing from the control arm for the 2002 Chevrolet Cavalier? Posted by Customer
    A:
    Tighten the Inch Nut (J21474-19) until the bushing is removed from the control arm, then disassemble the bushing removal tools.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm Bushing
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 22645683, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 22645683 Lower Control Arm Bushing, Front. It is sometimes referred to as GM Control Arm Bushing. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 22645683 Lower Control Arm Bushing, Front. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery