Make sure this part fits

GM 22064731
Strut, Front

1997-2005 GM

Customer Questions & Expert Answers (7)
GM 22064731 Strut, Front
  • Part Description
    Strut Assembly, Front Suspension; Suspension Strut Assembly Kit; Complete Strut Kit; Complete Strut; Shock Absorber
  • Position
    Front
  • Manufacturer
    General Motors
Make sure this part fits
$167.36 MSRP: $300.20
You Save: $132.84 (45%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005 Chevrolet ClassicBase4 Cyl 2.2 L GAS
    1997-2003 Chevrolet MalibuBase, LS4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
    1999 Oldsmobile AleroGL, GLS, GX4 Cyl 2.4 L GAS, 6 Cyl 3.4 L GAS
    1997-1999 Oldsmobile CutlassBase, GL, GLS6 Cyl 3.1 L GAS
    1997 Oldsmobile Cutlass SupremeBase6 Cyl 3.1 L GAS
    1999 Pontiac Grand AmSE4 Cyl 2.4 L GAS, 6 Cyl 3.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 22064731 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 22064731 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the shock absorber on Chevrolet Classic? Posted by Customer
    A:
    The first step for strut assembly replacement requires vehicle support under elevation and subsequent tire and wheel removal. First use a marker to trace the strut onto the knuckle before removing the strut mount to body nut in the trunk region. You should start by eliminating the fender well strut bolts before you remove the strut knuckle bolts and nuts from the strut . Pull the strut assembly out of the vehicle after completing all steps. Start by placing the strut back into the vehicle before you slightly tighten the knuckle bolts and nuts . First, plumb the scribe marks for alignment then secure the body bolts inside the fender well at 25 nm (18 ft. Lbs.) before torquing the knuckle nut bolts to 120 nm (89 ft. Lbs.). Reinstall the tire and wheel assembly while lowering the vehicle and install the trunk-area strut to body nut before final tightening to 25 nm (18 ft. Lbs.). Finish the process by verifying wheel alignment.
    Posted by ChevyPartsGiant Specialist
    Q:
    What size drill bit is used to drill a hole in the end cap for the 2005 Chevrolet Classic? Posted by Customer
    A:
    A 5 mm (3/16 inch) drill bit.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What are the final steps after tightening the strut rod piston nut for the 2003 Chevrolet Malibu? Posted by Customer
    A:
    Install the dust cap, release the compressed coil spring, and finally, install the strut assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How do you install the new strut for the 2002 Chevrolet Malibu? Posted by Customer
    A:
    Position the strut back into the vehicle and loosely install the strut to knuckle bolts and nuts, ensuring to align the scribe marks for proper alignment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What components need to be removed from the strut assembly for the 2000 Chevrolet Malibu? Posted by Customer
    A:
    Take off the strut support, dust seal, spring seat, upper insulator, coil spring, spring bumper, and lower insulator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the first step to replace the strut assembly for the 2001 Chevrolet Malibu? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Strut, Front 22064731 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 22064731 Strut, Front is available in the market under the name GM Shock Absorber. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 22064731 Strut, Front fits certain Chevrolet Malibu, Classic models, as well as Pontiac Grand Am. Additionally, it is compatible with Oldsmobile Cutlass, Alero, Cutlass Supreme models.
The original GM component designated by manufacturer part number 22064731 maintains top performance when functioning as the Strut Assembly, Front Suspension; Suspension Strut Assembly Kit; Complete Strut Kit; Complete Strut; Shock Absorber unit at its Front. The component 22064731 is constructed from durable material and its dimensions span 25.7 x 8.1 x 8.1 inches while weighing 11.40 Pounds. The component is ready in New condition to ensure full compatibility with your vehicle system. The part 22064731 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.