Make sure this part fits

GM 25904012
Rear Cable

2009-2012 GM

Customer Questions & Expert Answers (6)
GM 25904012 Rear Cable
GM 25904012 Rear Cable
  • Part Description
    Cable, Parking Brake; Brake Cable
  • Position
    Rear
  • Manufacturer
    General Motors
Make sure this part fits
$18.31 MSRP: $34.31
You Save: $16.00 (47%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number25904012
    Part DescriptionCable, Parking Brake; Brake Cable
    Item Dimensions3.1 x 13.4 x 12.6 inches
    Item Weight2.30 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU25904012
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2009-2012 Chevrolet ColoradoLT, WT4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    2009-2012 GMC CanyonSLE, SLT, WT4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25904012 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25904012 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the left rear parking brake cable on GMC Canyon? Posted by Customer
    A:
    It is necessary to begin the left rear Parking Brake Cable replacement by releasing the parked vehicle and properly securing it. First remove the adjusting nut on the park brake cable and then disconnect both the front park brake cable along with the left rear park brake cable from the equalizer. To replace the cable on long wheelbase vehicles start by disconnecting the frame rail connection of the cable at the left side while also removing the bolt retaining the rear park brake cable. In addition to left frame rail removal of the Parking Brake Cable, short wheelbase vehicle owners must follow the same procedure. After removing the left frame rail park brake cable retainer one should progress by removing the retaining nut located at the left rear Leaf Spring then uninstall the left rear park brake cable retaining bracket. Detach the park brake cable from the backing plate while holding it with the j 37043 tool prior to taking out the rear brake shoes. Reinstall the rear brake shoes after you put the new park brake cable into position inside the backing plate. Tighten the retaining nut of the rear Leaf Spring park brake cable to 9 nm (80 lb in) while attaching the cable to its bracket. The left rear frame rail needs retaining bolts to hold the park brake cable up while they become tightened to 9 nm (80 lb in). Short wheelbase vehicles need the installation of their park brake cable into the retaining bracket followed by tightening this bolt to 9 nm (80 lb in). A second such installation takes place in the retaining bracket for vehicles with long wheelbases. The left rear park brake cable requires connection to the park brake equalizer then the front park brake cable and ending with installation of the adjuster nut. Use the necessary method to adjust the park brake before lowering down the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step in the installation process for the 2009 Chevrolet Colorado? Posted by Customer
    A:
    Insert the new park brake cable into the backing plate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    How do you remove the release cable for the 2010 Chevrolet Colorado? Posted by Customer
    A:
    Press the locking tabs for the release cable at the lower dash panel and remove the release cable from both the lower dash panel and the park brake pedal mounting bracket, followed by the release lever.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    What is the next step after removing the cables for the 2009 GMC Canyon? Posted by Customer
    A:
    Remove the rear brake shoes, then use the J 37043 to detach the park brake cable from the backing plate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    What is the first step to replace the right rear parking brake cable for the 2010 GMC Canyon? Posted by Customer
    A:
    Ensure the park brake is released and raise the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 25904012, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 25904012 Rear Cable. It is sometimes referred to as GM Parking Brake Cable. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 25904012 Rear Cable. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery