Make sure this part fits

GM 19207441
Caliper

2003-2009 GM

Customer Questions & Expert Answers (14)
GM 19207441 Caliper
  • Part Description
    Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
  • Position
    Front
  • Replaces
    89060359, 88959948
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2007 Cadillac CTSBase, Luxury, Luxury Sport6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS
    2005-2009 Cadillac STSBase, Platinum, V6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19207441 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19207441 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you compress the caliper piston for the 2003 Cadillac CTS? Posted by Customer
    A:
    Use a large C-clamp over the brake caliper body, tightening it until the caliper piston is compressed enough to slide past the brake rotor, then remove the C-clamp.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How is the brake caliper piston removed for the 2005 Cadillac CTS? Posted by Customer
    A:
    Install a large C-clamp over the body of the brake caliper and direct low-pressure compressed air into the brake caliper inlet hole.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What tools are required to service and repair the brake caliper for the 2006 Cadillac CTS? Posted by Customer
    A:
    Universal Driver (J 8092) and Caliper Boot Seal Installer (J 45507).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be inspected on the brake caliper for the 2003 Cadillac CTS? Posted by Customer
    A:
    Inspect the brake caliper mounting bracket for corrosion and wear, replacing it if necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How should the pistons be removed for the 2004 Cadillac CTS? Posted by Customer
    A:
    Use low pressure compressed air to ease the pistons out of the bores, taking care to avoid injury.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be removed after compressing the caliper pistons for the 2007 Cadillac CTS? Posted by Customer
    A:
    The brake hose to caliper bolt and the brake hose from the caliper.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should you ensure while compressing the caliper piston for the 2004 Cadillac CTS? Posted by Customer
    A:
    Support the brake caliper with heavy mechanic's wire to prevent damage to the hydraulic flexible brake hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be ensured during installation for the 2007 Cadillac STS? Posted by Customer
    A:
    Ensure the caliper guide pin boots are properly seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How long should the threadlocker cure for the 2009 Cadillac STS? Posted by Customer
    A:
    About ten minutes.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the final step after completing the brake caliper replacement for the 2008 Cadillac STS? Posted by Customer
    A:
    Reinstall the tire and wheel assembly and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be inspected on the caliper bore and piston for the 2005 Cadillac STS? Posted by Customer
    A:
    Inspect for any cracks, scoring, or excessive corrosion, replacing the caliper assembly if needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the first step in servicing the rear brake caliper for the 2006 Cadillac STS? Posted by Customer
    A:
    Remove the brake caliper from the vehicle and extract the brake caliper piston from the caliper bore using low pressure compressed air directed through the brake fluid inlet hole.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the next step after inspecting and cleaning the caliper for the 2007 Cadillac STS? Posted by Customer
    A:
    Install the brake caliper bleeder valve and tighten it to 14 N.m (124 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Caliper 19207441 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19207441 Caliper is available in the market under the name GM Brake Calipers. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19207441 Caliper fits certain Cadillac CTS, STS models.
The original GM component designated by manufacturer part number 19207441 maintains top performance when functioning as the Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper unit at its Front. The component 19207441 is constructed from durable material and its dimensions span 7.3 x 4.1 x 12.7 inches while weighing 7.10 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 19207441 has available replacement options 89060359, 88959948. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.