Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 19368939
Caliper, Green Line

2004-2012 GM

Customer Questions & Expert Answers (12)
GM 19368939 Caliper, Green Line
GM 19368939 Caliper, Green Line
GM 19368939 Caliper, Green Line
GM 19368939 Caliper, Green Line
GM 19368939 Caliper, Green Line
GM 19368939 Caliper, Green Line
GM 19368939 Caliper, Green Line
  • Part Description
    Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
  • Replaces
    22705313
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 19368939 Caliper, Green Line is Ref No. 5 in the diagram below

    2007 Saturn Sky Caliper, Green Line Diagram for 19368939
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 19368939

  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2011 Chevrolet HHRLS, LS Panel, LT, LT Panel, SS4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
    2004-2012 Chevrolet MalibuBase, Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
    2005-2010 Pontiac G6Base, GT, GTP, GXP4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
    2006-2009 Pontiac SolsticeBase, GXP4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
    2007-2009 Saturn AuraGreen Line, Hybrid, XE, XR4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
    2007-2010 Saturn SkyBase, Red Line4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 19368939 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19368939 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front brake calipers on Chevrolet HHR? Posted by Customer
    A:
    Unless the brake master cylinder reservoir contains less than half its fluid capacity you should remove excess fluid before starting brake caliper replacement. Lift up the vehicle and take off the tire and wheel unit. Replace the rotor to hub by hand-tightening two wheel nuts between opposite wheel studs. Secure a c-clamp on top of the brake caliper housing then tighten it until the piston can move through the brake rotor. Take the clamp off afterward. Take off the brake hose fitting bolt then remove both brake hose fitting gaskets and brake hose before plugging the brake system to avoid fluid leaks. Discard the removed parts. Take out the brake caliper guide pin bolts then pull off the caliper from its bracket. Check if guide pins move properly and replace them plus the boots when needed. Place the caliper on the bracket and fasten its guide pins with torque at 35 nm (26 lb ft). Connect the brake hose fitting hardware along with gaskets onto the brake hose. Afterward attach the hose assembly to the caliper and torque the bolt to 40 nm (30 lb ft). Let the hydraulic brake system air out then disconnect the wheel nuts as you reinstall the tire wheels. Lower the car and press the Brake Pedal slowly from zero to two thirds distance with the engine off. Repeat this three times to help brake caliper pistons settle.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after inspecting the fluid level for the 2010 Chevrolet HHR? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How do you retain the rotor to the hub for the 2006 Chevrolet HHR? Posted by Customer
    A:
    Install and firmly hand tighten 2 wheel nuts to opposite wheel studs.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How do you retain the rotor to the hub for the 2009 Chevrolet HHR? Posted by Customer
    A:
    Install and firmly hand tighten 2 wheel nuts to opposite wheel studs.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the torque specification for the hose-to-caliper bolt for the 2008 Chevrolet Malibu? Posted by Customer
    A:
    Tighten it to 50 N.m (37 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done after installing the guide pin bolts for the 2009 Chevrolet Malibu? Posted by Customer
    A:
    Remove the caps or plugs, install NEW copper brake hose gaskets, and attach the brake hose and bolt, tightening the bolt to 50 Nm (37 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How should the brake pedal be applied after lowering for the 2008 Chevrolet HHR? Posted by Customer
    A:
    With the engine OFF, gradually apply the brake pedal to approximately 2/3 of its travel distance, slowly release it, and repeat until a firm brake pedal is obtained.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the torque specification for tightening the brake hose bolt for the 2005 Chevrolet Malibu? Posted by Customer
    A:
    Tighten the bolt to 50 Nm (37 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How should the brake caliper be supported during removal for the 2006 Chevrolet Malibu? Posted by Customer
    A:
    Support the brake caliper with heavy mechanic's wire to prevent damage to the hydraulic flexible brake hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How do you prevent fluid loss and contamination for the 2007 Chevrolet HHR? Posted by Customer
    A:
    Cap or plug the openings in the brake caliper and hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What method is used to ease the pistons out of the caliper for the 2004 Chevrolet Malibu? Posted by Customer
    A:
    Apply low pressure compressed air through the fluid inlet hole.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Caliper, Green Line 19368939 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19368939 Caliper, Green Line is available in the market under the name GM Brake Caliper Repair Kit, Brake Calipers. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19368939 Caliper, Green Line fits certain Chevrolet Malibu, HHR models, as well as Pontiac Solstice, G6. Additionally, it is compatible with Saturn Sky, Aura models.
The original GM component designated by manufacturer part number 19368939 maintains top performance when functioning as the Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper unit. The component 19368939 is constructed from durable material and its dimensions span 9.7 x 7.5 x 5.6 inches while weighing 7.00 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 19368939 has available replacement options 22705313. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.