Make sure this part fits

GM 89047654
Caliper

2000-2005 GM

Customer Questions & Expert Answers (11)
GM 89047654 Caliper
  • Part Description
    Caliper Assembly, Rear Brake; Brake Caliper
  • Position
    Rear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number89047654
    Part DescriptionCaliper Assembly, Rear Brake; Brake Caliper
    Other NamesCaliper, Wheel Brake Cylinder/Caliper
    Item Dimensions12.4 x 10.3 x 5.9 inches
    Item Weight10.30 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU89047654
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2000-2005 Cadillac DeVilleBase, DHS, DTS, Protection Series8 Cyl 4.6 L GAS
    2003-2004 Cadillac SevilleSLS, STS8 Cyl 4.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is 89047654 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 89047654 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What precautions should be taken when applying compressed air to remove the piston for the 2005 Cadillac DeVille? Posted by Customer
    A:
    Exercise caution to avoid injury and use clean cloths to pad the interior of the caliper housing during piston removal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How should the piston boot and seal be removed for the 2003 Cadillac DeVille? Posted by Customer
    A:
    Use a small plastic or wood tool to avoid damage when removing the piston boot and seal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How do you compress the caliper piston for the 2001 Cadillac DeVille? Posted by Customer
    A:
    Use a large C-clamp over the brake caliper body, with the ends against the rear of the caliper and the outer brake pad, and tighten it until the piston is compressed enough to slide past the brake rotor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done after removing the C-clamp for the 2004 Cadillac DeVille? Posted by Customer
    A:
    Detach the brake hose to caliper bolt and plug the openings to prevent fluid loss and contamination, then remove the brake hose and discard the two copper brake hose gaskets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be inspected on the pistons for the 2000 Cadillac DeVille? Posted by Customer
    A:
    Inspect for scoring, nicks, cracks, wear, or corrosion, and replace them if damaged.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How do you compress the brake caliper piston for the 2002 Cadillac DeVille? Posted by Customer
    A:
    Use a large C-clamp over the top of the brake caliper housing against the back of the outboard brake pad.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How should the brake caliper pin bolts and retainers be prepared for installation for the 2002 Cadillac DeVille? Posted by Customer
    A:
    Clean them with denatured alcohol and dry them with non-lubricated, filtered air.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done after inspecting the fluid level for the 2004 Cadillac Seville? Posted by Customer
    A:
    Raise and support the vehicle, mark the relationship of the wheel to the axle flange, and remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done after compressing the brake caliper piston for the 2004 Cadillac Seville? Posted by Customer
    A:
    Remove the brake caliper inlet fitting bolt and the brake hose, discarding the two copper brake hose gaskets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How do you prepare the brake caliper for removal for the 2003 Cadillac Seville? Posted by Customer
    A:
    Hand tighten 2 wheel lug nuts to retain the rotor to the hub, then install a large C-clamp over the body of the brake caliper, tightening it until the caliper piston is compressed enough to slide past the brake rotor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 89047654, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 89047654 Caliper. It is sometimes referred to as GM Brake Caliper Repair Kit, GM Brake Calipers. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 89047654 Caliper. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Cadillac parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery