Make sure this part fits

GM 18047984
Overhaul Kit, Front

2004-2011 GM

Customer Questions & Expert Answers (14)
GM 18047984 Overhaul Kit, Front
  • Part Description
    Caliper Kit, Front Brake; Brake Caliper Repair Kit; Disc Brake Hardware Kit
  • Position
    Front
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2009 Cadillac SRXBase6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
    2005-2011 Cadillac STSBase, Platinum, V6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 18047984 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 18047984 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step in the assembly process for the 2005 Cadillac SRX? Posted by Customer
    A:
    Install the brake caliper back onto the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How should the brake caliper piston bore and seal counter-bore be cleaned for the 2006 Cadillac SRX? Posted by Customer
    A:
    Clean with denatured alcohol and dry with non-lubricated, filtered air.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the first step to replace the front brake caliper for the 2009 Cadillac SRX? Posted by Customer
    A:
    Inspect the fluid level in the brake master cylinder reservoir; if it is above the midway point between the maximum-full and minimum allowable levels, remove fluid to that midway point.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the procedure for attaching the brake hose for the 2004 Cadillac SRX? Posted by Customer
    A:
    Remove the plugs from the caliper and hose, then install new copper brake hose gaskets and attach the brake hose to the caliper, tightening the bolt to 50 Nm (37 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How do you prevent fluid loss during the process for the 2007 Cadillac SRX? Posted by Customer
    A:
    Plug the openings in the caliper and hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the next step after the threadlocker has cured for the 2010 Cadillac STS? Posted by Customer
    A:
    Apply a thin coat of high-temperature silicone brake lubricant to the brake caliper pin, install the caliper mounting bolts, and tighten them to 120 Nm (88 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What tools are required to service and repair the rear brake caliper (JE5) for the 2006 Cadillac STS? Posted by Customer
    A:
    Universal Driver (J8092) and Caliper Boot Seal Installer (J46275).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the first step to replace the front brake caliper (JE5) for the 2007 Cadillac STS? Posted by Customer
    A:
    Inspect the fluid level in the brake master cylinder reservoir; if it is above the midway point between the maximum-full and minimum allowable levels, remove fluid to that midway point.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What lubricant should be applied to the brake caliper pin bolts for the 2008 Cadillac SRX? Posted by Customer
    A:
    High-temperature silicone brake lubricant.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What tools are required to service and repair the front brake caliper (JL9) for the 2007 Cadillac STS? Posted by Customer
    A:
    J 8092 Universal Driver (J 8092) and J 45507 Caliper Boot Seal Installer (J 45507).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the first step in replacing the rear brake caliper for the 2008 Cadillac STS? Posted by Customer
    A:
    Inspect the fluid level in the brake master cylinder reservoir; if it is above the midway point between the maximum-full and minimum allowable levels, remove fluid to that midway point.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the procedure for installing the new caliper for the 2009 Cadillac STS? Posted by Customer
    A:
    Clean the threads of the bolts and the threaded holes with denatured alcohol.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How should the brake caliper piston bore and seal counter-bore be cleaned for the 2005 Cadillac STS? Posted by Customer
    A:
    Clean them with denatured alcohol and dry them with non-lubricated, filtered air.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Overhaul Kit, Front 18047984 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 18047984 Overhaul Kit, Front is available in the market under the name GM Brake Caliper Repair Kit, Brake Calipers. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 18047984 Overhaul Kit, Front fits certain Cadillac SRX, STS models.
The original GM component designated by manufacturer part number 18047984 maintains top performance when functioning as the Caliper Kit, Front Brake; Brake Caliper Repair Kit; Disc Brake Hardware Kit unit at its Front. The component 18047984 is constructed from durable material and its dimensions span 2.6 x 2.7 x 0.3 inches while weighing 0.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Caliper Kit, Wheel Brake Cylinder/Caliper. The part 18047984 has available replacement options. Each vehicle needs 2 units of the part marked as SKU 18047984. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.