Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 88957250
Compressor Assembly

2003-2007 GM

Customer Questions & Expert Answers (5)
GM 88957250 Compressor Assembly
GM 88957250 Compressor Assembly
GM 88957250 Compressor Assembly
  • Part Description
    Compressor, Air Suspension Compressor
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • 2005 Buick Rendezvous Compressor Assembly Diagram for 88957250
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 88957250

  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2007 Buick RendezvousCX, CX Plus, CXL, CXL Plus, Ultra6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
    2003-2005 Pontiac AztekBase, Rally6 Cyl 3.4 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is 88957250 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 88957250 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Air Suspension Compressor on Buick Rendezvous? Posted by Customer
    A:
    The first step to replacing an Air Suspension Compressor requires lifting and supporting the entire vehicle. Gather the Air Suspension Compressor filter from its position beneath the underbody rail and take off the two air tubes from the inflator solenoid. First remove Air Suspension Compressor electrical connector and compressor brackets bolts then remove Air Suspension Compressor assembly from the vehicle. Begin by extracting the compressor wires from their connector points to the air dryer and Air Suspension Compressor bolts before finally removing the Air Suspension Compressor from its expanse along the Air Suspension Compressor bracket and bracket and bolts from the compressor motor. New installation requires inserting the bolts and bracket to the compressor before torquing the Air Suspension Compressor bolts to 6 n.m (53 lb in). Secure the Air Suspension Compressor to its bracket with Air Suspension Compressor bolts before tightening them to 6 n.m (53 lb in). Reinstall the air dryer before adding air tubes to the inflator solenoid and connecting the compressor wires into the electrical connector. The install process starts with placing the Air Suspension Compressor filter onto the underbody rail and then securing the Air Suspension Compressor bracket nuts using 10 n.m (89 lb in) torque while the Air Suspension Compressor bracket bolts receive the same 10 n.m (89 lb in) torque. The final step requires connecting the Air Suspension Compressor electrical connector followed by bracket and Air Suspension Compressor installation onto the underbody rail before lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Service and Repair the Air Suspension Compressor on Buick Rendezvous? Posted by Customer
    A:
    Maintenance on the Air Suspension Compressor starts by lifting the vehicle to a stable position. Extract the Air Suspension Compressor filter which sits on the underbody rail before disconnecting the inflator solenoid air tubes. Start by disconnecting the Air Suspension Compressor electrical connector and removing the compressor assembly from your vehicle while taking out both compressor bracket bolts and nuts. Remove the compressor wires from the connector before the air dryer and finally the Air Suspension Compressor bolts. Use a wrench to remove the Air Suspension Compressor from the Air Suspension Compressor assembly bracket and afterward extract the bolts and bracket surrounding the compressor motor. Begin the installation by putting bolts and bracket on the compressor before tightening each Air Suspension Compressor bolt to 6 nm (53 inch lbs.). Fasten the Air Suspension Compressor onto its bracket with Air Suspension Compressor bolts before locking the bolts to a torque of 6 nm (53 inch lbs.). Install the air dryer first, then attach the air tubes into the inflator solenoid. Finally secure the compressor wires to the electrical connector. Place the Air Suspension Compressor filter onto the underbody rail and secure it. After this installation, use torque wrenches to tighten bracket nuts to 10 nm (89 inch lbs.) while keeping Air Suspension Compressor bracket bolts fastened at the same torque setting. Connect the electrical connector on the Air Suspension Compressor next test-fitting and installing the Air Suspension Compressor bracket onto underbody rail and return the vehicle to the floor.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after tightening the bracket nuts for the 2006 Buick Rendezvous? Posted by Customer
    A:
    Tighten the air compressor bracket bolts to 10 Nm (89 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Air Suspension Compressor
    Q:
    What components should be installed after securing the air compressor for the 2003 Buick Rendezvous? Posted by Customer
    A:
    Install the air dryer, followed by the air tubes onto the inflator solenoid.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Air Suspension Compressor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Compressor Assembly 88957250 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 88957250 Compressor Assembly is available in the market under the name GM Air Suspension Compressor. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 88957250 Compressor Assembly fits certain Buick Rendezvous models, as well as Pontiac Aztek models.
The original GM component designated by manufacturer part number 88957250 maintains top performance when functioning as the Compressor, Air Suspension Compressor unit. The component 88957250 is constructed from durable material and its dimensions span 14.4 x 12.5 x 6.8 inches while weighing 9.00 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Compressor; Air Suspension Compressor. The part 88957250 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.