Make sure this part fits

GM 15232855
Stabilizer Link, Rear

2001-2007 GM

Customer Questions & Expert Answers (18)
GM 15232855 Stabilizer Link, Rear
  • Part Description
    Link Assembly-Rear Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Control Arm; Sway Bar Link.
  • Position
    Rear
  • Replaces
    10412921
  • Manufacturer
    General Motors
Make sure this part fits
$76.41 MSRP: $174.90
You Save: $98.49 (57%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2007 Buick RendezvousCX, CX Plus, CXL, CXL Plus, Ultra6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
    2005-2007 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2005-2006 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2002-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    2002-2004 Oldsmobile SilhouetteGL, GLS, Premiere6 Cyl 3.4 L GAS
    2001-2005 Pontiac AztekBase, GT, Rally6 Cyl 3.4 L GAS
    2002-2006 Pontiac MontanaBase, SV66 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2005-2007 Saturn Relay1, 2, 36 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15232855 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15232855 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the torque specification for the stabilizer shaft link nut for the 2003 Buick Rendezvous? Posted by Customer
    A:
    Tighten the nut to 23 Nm (17 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What should be removed after raising for the 2007 Buick Rendezvous? Posted by Customer
    A:
    Remove the stabilizer shaft link bolt and nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the first step in the installation process for the 2005 Buick Rendezvous? Posted by Customer
    A:
    Use the pry bar to install the stabilizer shaft link insulators and the spacer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    How should the new stabilizer shaft link be installed for the 2004 Buick Rendezvous? Posted by Customer
    A:
    Place the new stabilizer shaft link in position and ensure to follow the Fastener Notice in Service Precautions when installing the nuts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the final step after replacing the stabilizer shaft link for the 2005 Buick Terraza? Posted by Customer
    A:
    Finally, lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What tool is needed to hold the stabilizer shaft link during removal for the 2006 Buick Rendezvous? Posted by Customer
    A:
    Use a wrench to hold the stabilizer shaft link.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the first step to replace the rear stabilizer shaft link for the 2002 Buick Rendezvous? Posted by Customer
    A:
    First, raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the final step in the process for the 2007 Buick Terraza? Posted by Customer
    A:
    Reinstall the tire and wheel assembly and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What do you do after removing the nuts for the 2007 Buick Terraza? Posted by Customer
    A:
    Take out the stabilizer shaft link from the suspension strut and stabilizer shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    How do you remove the stabilizer shaft link insulators and the spacer for the 2006 Buick Rendezvous? Posted by Customer
    A:
    Use a pry bar to take them out.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the final step after replacing the stabilizer shaft link for the 2006 Buick Terraza? Posted by Customer
    A:
    Finally, lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the final step after replacing the rear stabilizer shaft link for the 2002 Chevrolet Venture? Posted by Customer
    A:
    Lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    How do you install the new stabilizer shaft link for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Position the stabilizer link into the vehicle and install the stabilizer shaft link bolt and nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What should be adhered to during installation for the 2006 Chevrolet Uplander? Posted by Customer
    A:
    The Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    How should the stabilizer shaft link nuts be installed for the 2004 Chevrolet Venture? Posted by Customer
    A:
    Install the stabilizer shaft link nuts and tighten them to 31 Nm (23 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    How do you install the new stabilizer link for the 2002 Chevrolet Venture? Posted by Customer
    A:
    Position the stabilizer link into the vehicle, adhering to the Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What do you do after removing the bolt and nut for the 2005 Chevrolet Uplander? Posted by Customer
    A:
    Take out the stabilizer shaft link from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Stabilizer Link, Rear 15232855 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15232855 Stabilizer Link, Rear is available in the market under the name GM Sway Bar Link. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15232855 Stabilizer Link, Rear fits certain Chevrolet Uplander, Venture models, as well as Buick Rendezvous, Terraza. Additionally, it is compatible with Pontiac Aztek, Montana and Oldsmobile Silhouette models.
The original GM component designated by manufacturer part number 15232855 maintains top performance when functioning as the Link Assembly-Rear Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Control Arm; Sway Bar Link. unit at its Rear. The component 15232855 is constructed from durable material and its dimensions span 6.4 x 3.1 x 1.5 inches while weighing 0.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Link; Link, Stabilizer Shaft. The part 15232855 has available replacement options 10412921. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.