Make sure this part fits

GM 15163518
Crossmember

2004-2012 GM

Customer Questions & Expert Answers (13)
GM 15163518 Crossmember
  • Part Description
    Crossmember, Frame Bell Housing (Attaches To Frame Andside Rails)
  • Position
    Front
  • Manufacturer
    General Motors
Make sure this part fits
$173.11 MSRP: $258.82
You Save: $85.71 (34%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2012 Chevrolet ColoradoBase, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    2004-2012 GMC CanyonSL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15163518 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15163518 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after raising the 2004 Chevrolet Colorado? Posted by Customer
    A:
    Remove the crossmember mounting nuts and bolts, and then take the crossmember out of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Front Cross-Member
    Q:
    What is the first step to replace the Transmission Support Crossmember (2WD) for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Raise the vehicle and support the transmission with a suitable stand or jack.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Front Cross-Member
    Q:
    What should be done to the bolts before installation for the 2006 Chevrolet Colorado? Posted by Customer
    A:
    Clean the threads of the bolts with denatured alcohol or equivalent and allow them to dry.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Front Cross-Member
    Q:
    What should be done before installing the bolts for the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Ensure to remove all traces of the original adhesive patch, clean the threads of the bolt with denatured alcohol or equivalent, and allow them to dry.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Front Cross-Member
    Q:
    What is the installation process for the Transmission Support Crossmember for the 2011 Chevrolet Colorado? Posted by Customer
    A:
    Position the transmission support back onto the frame, loosely install the horizontal nuts and bolts, then the vertical bolts. Tighten the horizontal nuts to 50 N.m (37 lb ft) and the vertical bolts to 100 N.m (74 lb ft). Lower the transmission and install the nuts to the transmission mount before removing the stand or jack and lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Front Cross-Member
    Q:
    What should be done after raising the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Remove the crossmember mounting nuts and bolts, then take the crossmember out of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Front Cross-Member
    Q:
    What is the first step to replace the crossmember for the 2011 GMC Canyon? Posted by Customer
    A:
    First, raise the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Front Cross-Member
    Q:
    What is the torque specification for tightening the horizontal nuts for the 2008 GMC Canyon? Posted by Customer
    A:
    Tighten the horizontal nuts to 50 N.m (37 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Front Cross-Member
    Q:
    What is the first step to replace the crossmember for the transmission for the 2005 GMC Canyon? Posted by Customer
    A:
    First, raise the vehicle and support the transmission with a suitable stand or jack.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Front Cross-Member
    Q:
    What is the first step to replace the Transmission Support Crossmember (2WD) for the 2010 GMC Canyon? Posted by Customer
    A:
    Raise the vehicle and support the transmission with a suitable stand or jack.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Front Cross-Member
    Q:
    What should be done to the bolts before installation for the 2005 GMC Canyon? Posted by Customer
    A:
    Clean the threads of the bolts with denatured alcohol or an equivalent and allow them to dry before applying Threadlocker GM P/N 12345493 (Canadian P/N 10953488).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Front Cross-Member
    Q:
    How do you install the new crossmember for the 2009 GMC Canyon? Posted by Customer
    A:
    Position the crossmember back onto the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Front Cross-Member
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Crossmember 15163518 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15163518 Crossmember is available in the market under the name GM Front Cross-Member. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15163518 Crossmember fits certain Chevrolet Colorado models, as well as GMC Canyon models.
The original GM component designated by manufacturer part number 15163518 maintains top performance when functioning as the Crossmember, Frame Bell Housing (Attaches To Frame Andside Rails) unit at its Front. The component 15163518 is constructed from durable material and its dimensions span 19.1 x 12.4 x 12.8 inches while weighing 4.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Crossmember, Frame Bell Housing(Attaches To Frame And Side Rails). The part 15163518 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.