Make sure this part fits

GM 15076525
Trans Crossmember

2004-2012 GM

Customer Questions & Expert Answers (13)
GM 15076525 Trans Crossmember
GM 15076525 Trans Crossmember
  • Part Description
    Crossmember, Transmission Support; Transfer Case Mount; Transmission Mount
  • Manufacturer
    General Motors
Make sure this part fits
$244.71 MSRP: $385.03
You Save: $140.32 (37%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2012 Chevrolet ColoradoBase, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    2004-2012 GMC CanyonSL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15076525 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15076525 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you install the new crossmember for the 2004 Chevrolet Colorado? Posted by Customer
    A:
    Position the crossmember back onto the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Front Cross-Member
    Q:
    Are the steps for replacing the Transmission Support Crossmember different from those for the 2011 Chevrolet Colorado? Posted by Customer
    A:
    The initial steps are the same, but after raising the transmission, you need to remove the nuts retaining the transmission mount to the transmission support, then proceed with the same removal and installation procedures as outlined for 2WD.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Front Cross-Member
    Q:
    What should be done after raising the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Remove the crossmember mounting nuts and bolts, then take the crossmember out of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Front Cross-Member
    Q:
    What should be done after tightening the bolts for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Lower the transmission and install the nuts to the transmission mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Front Cross-Member
    Q:
    What is the next step after applying Threadlocker for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Install the bolts and nuts, tightening them to 60 N.m (44 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Front Cross-Member
    Q:
    What is the first step to replace the crossmember for the 2006 Chevrolet Colorado? Posted by Customer
    A:
    First, raise the vehicle and remove the crossmember mounting nuts and bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Front Cross-Member
    Q:
    What is the next step after removing the nuts from the transmission mount for the 2010 GMC Canyon? Posted by Customer
    A:
    Raise the transmission and remove the vertical bolts and horizontal nuts and bolts that secure the transmission support to the frame.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Front Cross-Member
    Q:
    What should be done before installing the bolts for the 2009 GMC Canyon? Posted by Customer
    A:
    Ensure to remove all traces of the original adhesive patch, clean the threads of the bolt with denatured alcohol or equivalent, and allow them to dry.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Front Cross-Member
    Q:
    How are fasteners that require replacement identified for the 2005 GMC Canyon? Posted by Customer
    A:
    Fasteners that require replacement or the use of thread locking compound or sealant are identified in the service procedure.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Front Cross-Member
    Q:
    What should be done after removing the vertical bolts for the 2005 GMC Canyon? Posted by Customer
    A:
    Remove the horizontal nuts and bolts that also secure the transmission support to the frame.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Front Cross-Member
    Q:
    What is the final step in the installation process for the 2011 GMC Canyon? Posted by Customer
    A:
    Install the bolts and nuts, tightening them to 60 N.m (44 lb ft), and finally lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Front Cross-Member
    Q:
    What should be done after removing the transmission support for the 2008 GMC Canyon? Posted by Customer
    A:
    Install the new transmission support to the frame, loosely install the horizontal nuts and bolts, and then loosely install the vertical bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Front Cross-Member
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Trans Crossmember 15076525 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15076525 Trans Crossmember is available in the market under the name GM Front Cross-Member. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15076525 Trans Crossmember fits certain Chevrolet Colorado models, as well as GMC Canyon models.
The original GM component designated by manufacturer part number 15076525 maintains top performance when functioning as the Crossmember, Transmission Support; Transfer Case Mount; Transmission Mount unit. The component 15076525 is constructed from durable material and its dimensions span 48.2 x 5.9 x 6.2 inches while weighing 19.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Crossmember, Transmission Mounting. The part 15076525 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.