Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 30022537
Evaporator Assembly

1999-2004 Chevrolet Tracker

Customer Questions & Expert Answers (4)
GM 30022537 Evaporator Assembly
  • Part Description
    Evaporator, A/C (W/Case)
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 30022537 Evaporator Assembly is Ref No. 1 in the diagram below

    2002 Chevy Tracker Evaporator Assembly Diagram for 30022537
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 30022537

  • Vehicle Fitment

    Year Make Model Trim Engine
    1999-2004 Chevrolet TrackerBase, LSi, LT, ZR24 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is 30022537 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 30022537 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the evaporator core on Chevrolet Tracker? Posted by Customer
    A:
    A technician must begin by evacuating and recovering refrigerant while following sir handling caution procedures. The sir system must be disabled alongside the negative Battery Cable. After clearing the instrument panel carrier you should first remove the bolt while sliding the plate counterclockwise to break the connection between bulkhead and Evaporator inlet and outlet tubes. First isolate the open refrigerant lines through capping to stop contamination and then remove the Evaporator temperature sensor electrical connector from the compressor control module. The Evaporator case removal begins by taking out the 6 screws along with 2 nuts until the case can be removed from the vehicle while additional steps require the removal of 5 screws and the Evaporator case insulation. Disconnect the Evaporator case halves then pull out the Evaporator from the lower case. Separate the expansion valve through removing its 2 bolts followed by detaching the Evaporator temperature sensor from the Evaporator unit. Set the Evaporator within the lower case after installing the Evaporator temperature sensor then fasten the expansion valve using the 2 bolts. Reconnect the Evaporator case halves by using 5 screws before reinstalling the Evaporator case into the vehicle. Screw and tighten the five screws alongside two nuts until they reach 10 n.m (89 lb in). Connect the Evaporator temperature sensor electrical connector to the compressor control module before applying new o-rings to the Evaporator pipe fittings which require mineral base 525 viscosity refrigerant oil. And the bulkhead needs the Evaporator inlet and outlet pipes to be connected by sliding the plate while rotating it clockwise then securing it using the bolt. Place back the instrument panel carrier followed by sir activation and the negative (-) battery cable reconnection. The evacuation and recharging process must be completed for the air conditioning system before operating it while checking for refrigerant leaks.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done with the open refrigerant lines for the 2003 Chevrolet Tracker? Posted by Customer
    A:
    Cap them to prevent contamination.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Evaporator
    Q:
    What is the process to extract the evaporator for the 2002 Chevrolet Tracker? Posted by Customer
    A:
    Separate the evaporator case halves and extract the evaporator from the lower case.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Evaporator
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Evaporator Assembly 30022537 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 30022537 Evaporator Assembly is available in the market under the name GM Evaporator. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 30022537 Evaporator Assembly fits certain Chevrolet Tracker models.
The original GM component designated by manufacturer part number 30022537 maintains top performance when functioning as the Evaporator, A/C (W/Case) unit. The component 30022537 is constructed from durable material and its dimensions span 12.9 x 12.8 x 12.9 inches while weighing 6.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Evaporator, A/C Evaporator. The part 30022537 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.