Make sure this part fits

GM 19180760
Steering Gear

2008-2009 GM

Customer Questions & Expert Answers (5)
GM 19180760 Steering Gear
  • Part Description
    Gear Kit, Steering
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number19180760
    Part DescriptionGear Kit, Steering
    Other NamesGear Assembly
    Item Dimensions60.8 x 16.8 x 16.2 inches
    Item Weight20.10 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU19180760
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2008-2009 Chevrolet EquinoxSport6 Cyl 3.6 L GAS
    2008-2009 Pontiac TorrentGXP6 Cyl 3.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 19180760 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19180760 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Rack and Pinion in those equipped with Electronic Power Steering on Chevrolet Equinox? Posted by Customer
    A:
    The first step to replace a Rack And Pinion on vehicles with electronic power steering requires wheel immobilization by using an anti-rotation pin to maintain a straight-ahead position. This step protects the sir from damaging incidents. Start by lifting the vehicle and placing it on a support system then remove the front tires. Start by removing both outer Tie Rod to Steering Knuckle nuts and discarding them before avoiding the use of pickle forks or wedge-type tools to protect wheel seal and bushing integrity. The j 24319-b (Steering Linkage and Tie Rod Puller) helps separate tie rods from steering knuckles before you rotate the intermediate Steering Shaft for accessing its pinch bolt. Separate the intermediate to Rack And Pinion pinch bolt before you disconnect the intermediate shaft from the Rack And Pinion. A technician should disconnect the stabilizer links from the stabilizer bar followed by removing the Rack And Pinion to cradle mounting bolts before extracting the Rack And Pinion through the vehicle's right side. Rack And Pinion owners should remove and preserve heat shields for future reinstallations. During installation check that the stabilizer rests at its highest position to achieve proper gear clearance and install the heat shield if necessary. Steer the Rack And Pinion through the right side opening before you insert it. After positioning the bushings in the supports, manually begin bolt installation and tighten them to 110 nm (81 lb ft). Mount the intermediate shaft to the Rack And Pinion through a new pinch bolt which requires a torque of 34 nm (25 lb ft). During stabilizer bar nut installation keep a firm grip on the ball stud to avoid turning while tightening the nuts. Secure the Tie Rod to the knuckle with a new nut which must reach 25 nm (18 lb ft) along with 90 degrees torque. After reinstalling the front wheels and tires check the front wheel alignment then perform adjustments as needed before performing the vehicle lowering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What tool should be avoided when freeing the ball stud for the 2008 Chevrolet Equinox? Posted by Customer
    A:
    A pickle fork or wedge-type tool.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Rack And Pinion
    Q:
    What is the first step in the installation process for the 2008 Chevrolet Equinox? Posted by Customer
    A:
    Position the power steering gear into the vehicle through the left wheel house area.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Rack And Pinion
    Q:
    How should the power steering hoses be connected for the 2009 Chevrolet Equinox? Posted by Customer
    A:
    Connect the power steering gear inlet hose and the power steering fluid cooler hose to the power steering gear, tightening to 25 Nm (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Rack And Pinion
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 19180760, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 19180760 Steering Gear. It is sometimes referred to as GM Rack And Pinion. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 19180760 Steering Gear. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery