Make sure this part fits

GM 88983942
Pull Handle, Black

2004-2007 GM

Customer Questions & Expert Answers (11)
GM 88983942 Pull Handle, Black
  • Part Description
    Handle, Front Door Trim
  • Position
    Front
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number88983942
    Part DescriptionHandle, Front Door Trim
    Other NamesHandle, Rear Side Door Trim Finish
    Item Dimensions10.8 x 3.4 x 3.4 inches
    Item Weight0.90 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    Require Quantity2
    ManufacturerGeneral Motors
    SKU88983942
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Cadillac CTSBase, V6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
    2004-2006 Cadillac SRXBase6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is 88983942 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 88983942 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the torque specification for the outside door handle nuts for the 2006 Cadillac CTS? Posted by Customer
    A:
    Tighten them to 7 Nm (62 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you disconnect the lock cylinder rod for the 2005 Cadillac CTS? Posted by Customer
    A:
    Disconnect the lock cylinder rod from the door latch and the outside door handle rod by opening the retainer at the door latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the front side door inside handle for the 2004 Cadillac CTS? Posted by Customer
    A:
    Remove the front door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done last for the 2007 Cadillac CTS? Posted by Customer
    A:
    Install the water deflector and the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you detach the inside door handle from the trim panel for the 2004 Cadillac CTS? Posted by Customer
    A:
    Slide the handle towards the front of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the torque specification for the door handle fastener for the 2005 Cadillac CTS? Posted by Customer
    A:
    Tighten it to 2 Nm (18 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How should the door handle assembly be positioned during installation for the 2004 Cadillac SRX? Posted by Customer
    A:
    Rotate the assembly up towards the front of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you install the new inside door handle for the 2005 Cadillac SRX? Posted by Customer
    A:
    Insert the inside door handle rod into the hole in the door handle assembly and rotate the assembly up towards the front of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you secure the cap after installing the handle for the 2004 Cadillac SRX? Posted by Customer
    A:
    Slightly open the door handle to install the cap, secure it with the screw, and replace the outside door handle cap screw access plug.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step in the installation process for the 2006 Cadillac SRX? Posted by Customer
    A:
    Attach the handle rod to the outside door handle bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 88983942, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 88983942 Pull Handle, Black. It is sometimes referred to as GM Door Handle. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 88983942 Pull Handle, Black. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Cadillac parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery