Make sure this part fits

GM 15044823
Door Handle, Driver Side

2004-2012 GM

Customer Questions & Expert Answers (17)
GM 15044823 Door Handle, Driver Side
  • Part Description
    Handle, Door Lock Remote Control Inside
  • Position
    Driver Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2012 Chevrolet ColoradoBase, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    2004-2012 GMC CanyonSL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15044823 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15044823 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you remove the spring clip retaining the rear side access door handle for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Insert the tool between the door handle and the door, then press the spring clip off the door handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What tool is needed to remove the spring clip for the 2009 Chevrolet Colorado? Posted by Customer
    A:
    The Door Handle Clip Remover (J 9886-01).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after installing the lock cables for the 2004 Chevrolet Colorado? Posted by Customer
    A:
    Insert the retaining tabs of the inside door handle into the slots of the door inner panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done with the lock cylinder for the 2010 Chevrolet Colorado? Posted by Customer
    A:
    Remove the lock cylinder from the outside door handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What are the final steps after installing the inside door handle for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Reinstall the water deflector and the front door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the rear side access door handle for the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Open the front and rear side access doors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after positioning the outside door handle onto the front door for the 2006 Chevrolet Colorado? Posted by Customer
    A:
    Install the bolts that retain the outside door handle to the door, tightening them to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you disconnect the rear outside door handle rod for the 2005 Chevrolet Colorado? Posted by Customer
    A:
    Disconnect the rear outside door handle rod by releasing the retaining clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you secure the inside door handle during installation for the 2009 Chevrolet Colorado? Posted by Customer
    A:
    Insert the retaining tabs into the slots of the door inner panel and slide the handle forward until the retainers are fully engaged.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What are the final steps after installing the handle for the 2010 GMC Canyon? Posted by Customer
    A:
    Reinstall the water deflector and the front door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the next step after removing the lock cables for the 2006 GMC Canyon? Posted by Customer
    A:
    Take the handle out of the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the front inside door handle for the 2004 GMC Canyon? Posted by Customer
    A:
    Remove the front door trim panel and the water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the torque specification for the bolts retaining the outside door handle for the 2007 GMC Canyon? Posted by Customer
    A:
    Tighten the bolts to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you install the new handle for the 2009 GMC Canyon? Posted by Customer
    A:
    Attach the lock cylinder to the outside door handle, then install the handle back onto the front door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be removed after the rear door trim panel for the 2009 GMC Canyon? Posted by Customer
    A:
    Next, take out the rear door speaker.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the next step after removing the lock cables for the 2008 GMC Canyon? Posted by Customer
    A:
    Take the handle out of the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Door Handle, Driver Side 15044823 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15044823 Door Handle, Driver Side is available in the market under the name GM Door Handle. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15044823 Door Handle, Driver Side fits certain Chevrolet Colorado models, as well as GMC Canyon models.
The original GM component designated by manufacturer part number 15044823 maintains top performance when functioning as the Handle, Door Lock Remote Control Inside unit at its Driver Side. The component 15044823 is constructed from durable material and its dimensions span 4.4 x 1.5 x 1.2 inches while weighing 0.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 15044823 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.