Make sure this part fits

GM 15784473
Intermed Pipe Hanger, Rear

2005-2013 GM

Customer Questions & Expert Answers (10)
GM 15784473 Intermed Pipe Hanger, Rear
GM 15784473 Intermed Pipe Hanger, Rear
  • Part Description
    Hanger Assembly-Exhaust Pipe Rear; Exhaust Hanger
  • Position
    Rear
  • Replaces
    10273796, 10273797, 10350596
  • Manufacturer
    General Motors
Make sure this part fits
$40.79 MSRP: $60.69
You Save: $19.90 (33%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2009 Cadillac XLRBase, Platinum, V8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
    2005-2013 Chevrolet Corvette427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR18 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15784473 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15784473 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after removing the muffler for the 2009 Cadillac XLR? Posted by Customer
    A:
    Take out the muffler hanger bolt and the hanger, followed by the removal of the hanger.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Hanger
    Q:
    What is the first step to service and repair the exhaust pipe/muffler hanger for the 2008 Cadillac XLR? Posted by Customer
    A:
    Begin by removing the muffler, following the procedures for either the left side or right side exhaust muffler replacement.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Hanger
    Q:
    What should be done after removing the muffler for the 2007 Cadillac XLR? Posted by Customer
    A:
    Take out the muffler hanger bolt and the hanger, followed by the removal of the hanger.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Hanger
    Q:
    What is the next step after installing the push-on retainer for the 2007 Chevrolet Corvette? Posted by Customer
    A:
    Install the muffler hanger and nuts, tightening them to 16 N.m (12 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Hanger
    Q:
    What should be done after removing the muffler for the 2008 Chevrolet Corvette? Posted by Customer
    A:
    Next, take off the muffler hanger nuts and the hanger itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Hanger
    Q:
    What is the first step in the installation process for the 2006 Chevrolet Corvette? Posted by Customer
    A:
    Begin by installing the hanger reinforcement if it was removed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Hanger
    Q:
    What should be adhered to during the installation for the 2005 Chevrolet Corvette? Posted by Customer
    A:
    It is important to adhere to the Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Hanger
    Q:
    What should be done after installing the exhaust pipe hanger for the 2008 Chevrolet Corvette? Posted by Customer
    A:
    Install the upper exhaust pipe hanger bolts and tighten them to 50 N.m (37 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Hanger
    Q:
    Is there anything else that may need to be removed for the 2010 Chevrolet Corvette? Posted by Customer
    A:
    If necessary, remove the push-on retainer and the hanger reinforcement.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Hanger
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Intermed Pipe Hanger, Rear 15784473 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15784473 Intermed Pipe Hanger, Rear is available in the market under the name GM Exhaust Hanger. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15784473 Intermed Pipe Hanger, Rear fits certain Chevrolet Corvette models, as well as Cadillac XLR models.
The original GM component designated by manufacturer part number 15784473 maintains top performance when functioning as the Hanger Assembly-Exhaust Pipe Rear; Exhaust Hanger unit at its Rear. The component 15784473 is constructed from durable material and its dimensions span 6.6 x 2.9 x 2.0 inches while weighing 0.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hanger, Exhaust Pipe. The part 15784473 has available replacement options 10273796, 10273797, 10350596. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.