Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 12472734
Cup Holder

1999-2002 GM

Customer Questions & Expert Answers (7)
GM 12472734 Cup Holder
  • Part Description
    Holder, Seat Separator Console
  • Position
    Front
  • Manufacturer
    General Motors
Make sure this part fits
$39.93 MSRP: $59.41
You Save: $19.48 (33%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • 12472734 Cup Holder is Ref No. 4 in the diagram below

    2002 Chevy Suburban 2500 Cup Holder Diagram for 12472734
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 12472734

  • Vehicle Fitment

    Year Make Model Trim Engine
    1999-2002 Chevrolet Silverado 1500Base, LS, LT, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2001-2002 Chevrolet Silverado 1500 HDLS, LT8 Cyl 6.0 L GAS
    1999-2002 Chevrolet Silverado 2500Base, LS, LT8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    2001-2002 Chevrolet Silverado 2500 HDBase, LS, LT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2001-2002 Chevrolet Silverado 3500Base, LS, LT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2000-2002 Chevrolet Suburban 1500Base, LS, LT8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2000-2002 Chevrolet Suburban 2500Base, LS, LT8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
    2000-2002 Chevrolet TahoeBase, LS, LT, Z718 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    1999-2002 GMC Sierra 1500Base, C3, Denali, HT, SL, SLE, SLT, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2001-2002 GMC Sierra 1500 HDSLE, SLT8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 12472734 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12472734 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Cup Holder (Non-Console) on Chevrolet Tahoe? Posted by Customer
    A:
    To replace the Cup Holder (Cup Holder Replacement (Non-Console)), tilt it down, unscrew it from the instrument panel (IP), and remove the Cup Holder from the vehicle. For installing, place the Cup Holder to the ip, remembering to follow the fastener notice in service precautions; install the screws to secure the Cup Holder to the ip and tighten the screws to 2 n.m (18 lb in). Lastly, place the Cup Holder up.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Cup Holder on Chevrolet Tahoe? Posted by Customer
    A:
    To replace the Cup Holder first turn it down,take out the screws (Part Number: 12345) affixing it to the instrument panel (IP), remove the Cup Holder out of the vehicle. To install, place the Cup Holder back to the ip, paying attention to the fastener notice in service precautions, and insert the screws (Part Number: (12345) to lock the Cup Holder, torquing them to 2 n.m (18 lb in) then restoring the Cup Holder to up position.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front floor console cup holder on Chevrolet Suburban 2500? Posted by Customer
    A:
    The replacement process for the front floor console cup holder starts with pulling down the cup holder from its rear position within the floor console. First you should slowly separate the tabs connecting the cup holder to the floor console using a flat bladed tool before pulling out the cup holder from the vehicle. Place the cup holder inside the vehicle and use the tabs to install it onto the floor console. Finish cup holder installation by placing it back into the rear position of the floor console.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Cup Holder (Non-Console) on Chevrolet Suburban 1500? Posted by Customer
    A:
    You should start the Cup Holder (Cup Holder Replacement (Non-Console)) replacement process by lowering the Cup Holder then removing screws which connect it to the instrument panel (IP) before you take it away from the vehicle. Place the Cup Holder on the ip while following the fastener notice and secure it with screws applying 2 n.m (18 lb in) torque. The installation ends when you position the Cup Holder back in its upright position.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Cup Holder on GMC Yukon XL 1500? Posted by Customer
    A:
    Start by tilting the Cup Holder down followed by screw removal from the instrument panel (IP) then extract the Cup Holder from the vehicle. After positioning the Cup Holder against the ip surface install its screws and torque them to 2 n.m (18 lb in) then put the Cup Holder in its upright position.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front seat Cup Holder on GMC Yukon XL 1500? Posted by Customer
    A:
    To change the front seat cup holder, first remove the center seat while maintaining eye protection, to avoid personal injury due to the drilling of rivets. Then, take out the rivets holding the cup holder to the bottom of the center seat, and finally, the cup holder itself. To install, put the new cup holder in place, rivet it on the bottom of the center seat, and finally, reattach the center seat.
    Posted by ChevyPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Cup Holder 12472734 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12472734 Cup Holder is available in the market under the name GM Cup Holder. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12472734 Cup Holder fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD models.
The original GM component designated by manufacturer part number 12472734 maintains top performance when functioning as the Holder, Seat Separator Console unit at its Front. The component 12472734 is constructed from durable material and its dimensions span 10.8 x 7.4 x 3.6 inches while weighing 0.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 12472734 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.