Make sure this part fits

GM 88941201
Cup Holder

2003-2007 GM

Customer Questions & Expert Answers (10)
GM 88941201 Cup Holder
GM 88941201 Cup Holder
  • Part Description
    Holder, Seat Cushion
  • Position
    Front Center
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2007 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2003-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L GAS
    2003-2007 Chevrolet Silverado 2500 HDBase, LS, LT, LTZ, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 2500 HD ClassicLS, LT, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2003-2006 Chevrolet Silverado 3500Base, LS, LT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 3500 ClassicLS, LT, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 3500 HDLT, LTZ, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 88941201 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 88941201 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front seat Cup Holder on Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Ear protection must be used when removing the center seat before drilling rivets since this helps prevent injuries. First remove the rivets from the underpart of the center seat base before extracting the cup holder from its position. You should position the new cup holder correctly then connect the rivets to the bottom of the center seat before you install the complete center seat.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the rear cup holder in the front floor console on GMC Sierra 1500 Classic? Posted by Customer
    A:
    First step to replace the rear cup holder in the front floor console is to lower the cup holder. A flat-bladed tool (Flat-Bladed Tool) should be used to separate the cup holder from the console by inserting it next to the cup holder hinge and end panel. Installation should start with the placement of one hinge inside the panel opening followed by swinging the cup holder assembly to fix the opposite hinge. Complete the process by checking that the assembly operates as expected.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after removing the center seat for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Take out the rivets that secure the cupholder from the bottom of the center seat and then remove the cupholder itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Cup Holder
    Q:
    What should be done next if it is equipped with a remote CD player for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Take out the remote CD player.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Cup Holder
    Q:
    What is the final step after installing the new cupholder for the 2005 Chevrolet Silverado 1500? Posted by Customer
    A:
    Reinstall the center seat.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Cup Holder
    Q:
    What is the installation process for the new cupholder for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Place one of the hinges in the opening in the panel and swing the cupholder assembly to install the other hinge in the opposite opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Cup Holder
    Q:
    How do you remove the front floor console cup holder (Non-Luxury) for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Firmly grab the middle of the cupholder and pull outwards to release the clips, then remove the cupholder from the console.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Cup Holder
    Q:
    How do you install the new cupholder for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Place the new cupholder in position and secure it with the rivets at the bottom of the center seat.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Cup Holder
    Q:
    What should you do after placing the first hinge for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Swing the cupholder assembly to install the other hinge in the opposite opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Cup Holder
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Cup Holder 88941201 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 88941201 Cup Holder is available in the market under the name GM Cup Holder. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 88941201 Cup Holder fits certain Chevrolet Silverado 1500, Silverado 2500 HD, Silverado 2500 models, as well as GMC Sierra 1500, Sierra 2500 HD, Sierra 2500 models.
The original GM component designated by manufacturer part number 88941201 maintains top performance when functioning as the Holder, Seat Cushion unit at its Front Center. The component 88941201 is constructed from durable material and its dimensions span 12.8 x 9.2 x 4.4 inches while weighing 2.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 88941201 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.