Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 15725716
Cup Holder

1995-2000 GM

Customer Questions & Expert Answers (5)
GM 15725716 Cup Holder
  • Part Description
    Holder, Instrument Panel
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 15725716 Cup Holder is Ref No. 13 in the diagram below

    2000 GMC Yukon Cup Holder Diagram for 15725716
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 15725716

  • Vehicle Fitment

    Year Make Model Trim Engine
    1995-1999 Chevrolet C1500Base, Cheyenne, LS, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1995-1996 Chevrolet C1500 SuburbanBase, LS, LT8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1995-2000 Chevrolet C2500Base, Cheyenne, LS, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1995-1996 Chevrolet C2500 SuburbanBase, LS, LT8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1995-2000 Chevrolet C3500Base, Cheyenne, LS, Silverado8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1995-1999 Chevrolet K1500Base, Cheyenne, LS, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1995-1996 Chevrolet K1500 SuburbanBase, LS, LT8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1995-2000 Chevrolet K2500Base, Cheyenne, LS, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1995-1996 Chevrolet K2500 SuburbanBase, LS, LT8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1995-2000 Chevrolet K3500Base, Cheyenne, LS, Silverado8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 15725716 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15725716 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Cup Holder on Chevrolet K3500? Posted by Customer
    A:
    The cup holder replacement process starts by taking out the ashtray then removing the cup holder from its place. Unfasten the knee bolster then you can break free two rear screws from the cup holder. A person should detach the cup holder retainer by twisting it counterclockwise from beneath the instrument panel before removing the cup holder. The new cup holder must slide onto the instrument panel metal track before installing the cup holder retainer by twisting it to the right under the instrument panel. Install the cup holder inside the instrument panel by fitting its screws at the rear position and tighten them to 2 N.m (18 lb in) while you maintain the cup holder face plate against the cluster bezel opening to keep it properly aligned. Put back the ashtray and knee bolster at the end of the process.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front floor console cup holder on GMC C2500? Posted by Customer
    A:
    Open the cup holder by pulling down from behind the front floor console before proceeding with the replacement. To detach the cup holder from its floor console placement you should use a flat bladed tool to split open the connective tabs followed by removing the cup holder component from the car. You can install the cup holder by positioning it properly into the vehicle before finishing with a tab snap on the console. To complete the process close the cup holder by directing it back towards the rear section of the floor console.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Cup Holder on GMC C3500? Posted by Customer
    A:
    The cup holder replacement process starts by taking out the ashtray then removing the cup holder from its place. Unfasten the knee bolster then you can break free two rear screws from the cup holder. A person should detach the cup holder retainer by twisting it counterclockwise from beneath the instrument panel before removing the cup holder. The new cup holder must slide onto the instrument panel metal track before installing the cup holder retainer by twisting it to the right under the instrument panel. Install the cup holder inside the instrument panel by fitting its screws at the rear position and tighten them to 2 N.m (18 lb in) while you maintain the cup holder face plate against the cluster bezel opening to keep it properly aligned. Put back the ashtray and knee bolster at the end of the process.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should you do after removing the screws for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Take the cupholder out of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Cup Holder
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Cup Holder 15725716 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15725716 Cup Holder is available in the market under the name GM Cup Holder. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15725716 Cup Holder fits certain Chevrolet Tahoe, C1500, C2500 models, as well as GMC Yukon, C1500, C2500 models.
The original GM component designated by manufacturer part number 15725716 maintains top performance when functioning as the Holder, Instrument Panel unit. The component 15725716 is constructed from durable material and its dimensions span 13.0 x 4.6 x 4.5 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Box. The part 15725716 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.