Make sure this part fits

GM 19366692
Flex Hose, Front

2003-2011 GM

Customer Questions & Expert Answers (13)
GM 19366692 Flex Hose, Front
  • Part Description
    Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line
  • Position
    Front
  • Replaces
    22716552, 15870413
  • Manufacturer
    General Motors
Make sure this part fits
$23.23 MSRP: $70.51
You Save: $47.28 (68%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2010 Chevrolet CobaltBase, LS, LT, LTZ, Sport, SS4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
    2006-2011 Chevrolet HHRLS, LS Panel, LT, LT Panel, SS4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
    2007-2009 Pontiac G5Base, GT4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
    2003-2007 Saturn Ion1, 2, 3, Red Line4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19366692 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19366692 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be checked after reinstalling the tire and wheel assembly for the 2005 Chevrolet Cobalt? Posted by Customer
    A:
    Ensure the hose does not contact any part of the suspension; if it does, remove the hose and correct the condition.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the torque specification for connecting the brake pipe fittings for the 2007 Chevrolet Cobalt? Posted by Customer
    A:
    Tighten them to 19 N.m (14 lb ft) using a backup wrench on the hose fitting.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done with the brake hose retaining clips for the 2008 Chevrolet Cobalt? Posted by Customer
    A:
    Remove the brake hose retaining clips from the hose mounting brackets and take the hose out of the mounting brackets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the torque specification for connecting the front brake pipe fitting for the 2009 Chevrolet Cobalt? Posted by Customer
    A:
    Tighten it to 19 Nm (14 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be checked after reinstalling the tire and wheel assembly for the 2008 Chevrolet Cobalt? Posted by Customer
    A:
    Ensure the hose does not contact any part of the suspension; if it does, remove the hose and correct the condition.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be checked after reinstalling the tire and wheel assembly for the 2006 Chevrolet Cobalt? Posted by Customer
    A:
    Ensure the hose does not contact any part of the suspension; if it does, remove the hose and correct the condition.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the first step in the installation process for the 2010 Chevrolet Cobalt? Posted by Customer
    A:
    Remove the caps or plugs, then install new copper brake hose gaskets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How do you install the new brake hose for the 2009 Chevrolet HHR? Posted by Customer
    A:
    Position the new brake hose into the mounting brackets, ensuring the hose fittings align with the notch in the brackets, and secure with the hose retaining clips.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done to the openings in the brake caliper and the brake hose for the 2008 Chevrolet HHR? Posted by Customer
    A:
    Cap or plug the openings in the brake caliper and the brake hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How is the new pipe installed for the 2008 Chevrolet HHR? Posted by Customer
    A:
    Install the pipe to the vehicle with the appropriate unions, secure it to the retainers, and bleed the hydraulic brake system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the installation process for the new brake hose for the 2010 Chevrolet HHR? Posted by Customer
    A:
    Remove the caps or plugs, install new copper brake hose gaskets, and assemble the brake hose fitting bolt with the gaskets to the brake hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the first step to replace the rear brake hose for the 2007 Chevrolet HHR? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Flex Hose, Front 19366692 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19366692 Flex Hose, Front is available in the market under the name GM Brake Line. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19366692 Flex Hose, Front fits certain Chevrolet Cobalt, HHR models, as well as Pontiac G5. Additionally, it is compatible with Saturn Ion models.
The original GM component designated by manufacturer part number 19366692 maintains top performance when functioning as the Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line unit at its Front. The component 19366692 is constructed from durable material and its dimensions span 5.2 x 2.0 x 12.2 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hose, Hydraulic Brake. The part 19366692 has available replacement options 22716552, 15870413. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.