Make sure this part fits

GM 19366767
Flex Hose, Front Driver Side

1991-2000 GM

Customer Questions & Expert Answers (4)
GM 19366767 Flex Hose, Front Driver Side
  • Part Description
    Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line
  • Position
    Front Driver Side
  • Replaces
    94665589, 22113479
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number19366767
    Part DescriptionHose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line
    Other NamesHose, Hydraulic Brake
    Item Dimensions27.3 x 1.0 x 1.1 inches
    Item Weight28.10 Pounds
    PositionFront Driver Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces94665589, 22113479
    ManufacturerGeneral Motors
    SKU19366767
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1991-1999 Chevrolet C1500454 SS, Base, Cheyenne, LS, Scottsdale, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1991-2000 Chevrolet C2500Base, Cheyenne, LS, Scottsdale, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1991-2000 Chevrolet C3500Base, Cheyenne, LS, Scottsdale, Silverado8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1991-1999 Chevrolet K1500Base, Cheyenne, LS, Scottsdale, Silverado, Sport, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
    1991-2000 Chevrolet K2500Base, Cheyenne, LS, Scottsdale, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1991-2000 Chevrolet K3500Base, Cheyenne, LS, Scottsdale, Silverado8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1991-1999 GMC C1500Sierra, Sierra GT, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX, Sierra Special6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
    1991-2000 GMC C2500Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1991-2000 GMC C3500Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1991-1999 GMC K1500Sierra, Sierra SL, Sierra SLE, Sierra SLS, Sierra SLT, Sierra SLX, Sierra Special, Sierra Sport6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
    View More
  • Customer Questions & Expert Answers

    Q:
    Is this 19366767 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19366767 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front brake line on Chevrolet K3500? Posted by Customer
    A:
    To replace the front brake hose, first clean the two ends where the hose fits to clear all dirt, grease and foreign material. Pull out the brake hose and then remove the clip, bolt, and washers, followed by the end of the steel pipe. When installing a new brake hose, make sure it is not twisted and does not contact any other components and use new copper washers at the time of installation. Really tighten the bolt then 44 Nm (32 ft. lbs.) and put the clip. Finally, link steel pipe and bleed brake to finalize the procedure.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front brake line on GMC C2500? Posted by Customer
    A:
    When working on the front brake hose you must first jack up the vehicle and take off its tire and wheel. Erase contaminants from all hose contact points before pulling out the brake pipe from the frame. Detach the brake hose retaining clip and afterwards remove the brake hose bolt from both the frame and upper Control Arm. After taking off the caliper bracket, remove the bolt from the Steering Knuckle. Take out the brake hose by removing its caliper mounting bolt and compression washers at each end and discarding the washers. Open space allows you to place the new brake hose correctly before fastening the caliper mounting bolt to 45 n.m (33 lb ft. Wind up the brake hose bolt and bracket onto the Steering Knuckle and upper Control Arm till they measure 9 N.m (80 lb in) torque, then spice up the brake hose bolt to the framework at 12 n.m (106 lb in). Secure the brake hose retaining clip and join the brake pipe through the bolt that you tighten to 25 n.m. Perform brake bleeding work and put back the tire and wheel components. Take away the safety stands and let the vehicle down.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front brake line on GMC C3500? Posted by Customer
    A:
    Clean the entire surface area of front brake hose fittings at each end before proceeding to change the brake hose. Follow these steps when replacing the front brake hose: disconnect the steel pipe while removing the clip and bolt it alongside washers before you pull the brake hose off. When installing the new brake hose make sure it stays untwisted and avoids contact with other components using new copper washers during the installation process. Use a wrench to torque the bolt to 44 Nm (32 ft. lbs.) before attaching the steel pipe with its clip. Performance of the brake system requires bleeding after finishing this work.
    Posted by ChevyPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 19366767, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 19366767 Flex Hose, Front Driver Side. It is sometimes referred to as GM Brake Line, GM Hydraulic Hose. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 19366767 Flex Hose, Front Driver Side. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery