Make sure this part fits

GM 84393885
Flex Hose, Front Driver Side

2006-2016 GM

Customer Questions & Expert Answers (8)
GM 84393885 Flex Hose, Front Driver Side
  • Part Description
    Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line
  • Position
    Front Driver Side
  • Replaces
    15242632
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2013 Chevrolet Impala50th Anniversary Edition, LS, LT, LTZ, Police, SS6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
    2014-2016 Chevrolet Impala LimitedLS, LT, LTZ, Police6 Cyl 3.6 L FLEX
    2006-2007 Chevrolet Monte CarloLS, LT, LTZ, SS6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 84393885 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 84393885 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done with the weight during installation for the 2006 Chevrolet Impala? Posted by Customer
    A:
    With the vehicle's weight on the suspension, install the brake hose into the bracket without kinks, aligning the hose fitting with the notch in the bracket using the hose paint stripe as a guide.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How do you disconnect the brake pipe fitting from the brake hose for the 2008 Chevrolet Impala? Posted by Customer
    A:
    Use a backup wrench on the hose fitting to disconnect the brake pipe fitting from the brake hose, then cap or plug the brake pipe fitting end without bending the brake pipe or bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How should the brake pipe fitting be connected to the brake hose for the 2010 Chevrolet Impala? Posted by Customer
    A:
    Connect it using a backup wrench, ensuring not to bend the bracket or pipe, and tighten it to 18 Nm (13 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the torque specification for tightening the brake hose to caliper bolt for the 2009 Chevrolet Impala? Posted by Customer
    A:
    Tighten it to 54 Nm (40 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the first step to replace the front brake hose for the 2010 Chevrolet Impala? Posted by Customer
    A:
    Raise and support the vehicle securely.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the first step in replacing the brake pipe for the 2006 Chevrolet Monte Carlo? Posted by Customer
    A:
    Inspect the section of the brake pipe to be replaced and release it from the retainers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be checked after creating the flare for the 2007 Chevrolet Impala? Posted by Customer
    A:
    Remove the dies and inspect the flare for correct shape and diameter (7.10 mm (0.279 in) +/- 0.18 mm (0.007 in) for 4.76 mm (3/16 in) diameter pipe).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Flex Hose, Front Driver Side 84393885 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 84393885 Flex Hose, Front Driver Side is available in the market under the name GM Brake Line, Hydraulic Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 84393885 Flex Hose, Front Driver Side fits certain Chevrolet Impala, Monte Carlo, Impala Limited models.
The original GM component designated by manufacturer part number 84393885 maintains top performance when functioning as the Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line unit at its Front Driver Side. The component 84393885 is constructed from durable material and its dimensions span 10.5 x 8.5 x 5.4 inches while weighing 0.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hose, Hydraulic Brake. The part 84393885 has available replacement options 15242632. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.