Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 15814859
Filler Hose

2004-2013 GM

Customer Questions & Expert Answers (10)
GM 15814859 Filler Hose
GM 15814859 Filler Hose
GM 15814859 Filler Hose
  • Part Description
    Hose, Fuel Tank Filler; Fuel Filler Hose
  • Replaces
    10349566, 10310050
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 15814859 Filler Hose is Ref No. 18 in the diagram below

    2009 Cadillac XLR Filler Hose Diagram for 15814859
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 15814859

  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2009 Cadillac XLRBase, Platinum, V8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
    2005-2013 Chevrolet Corvette427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR18 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 15814859 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15814859 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Replace a Fuel Filler Hose on Cadillac XLR? Posted by Customer
    A:
    The first step for Fuel Filler Hose replacement involves taking off the fuel filler cap together with the left rear wheelhouse liner panel. You should disconnect both the fuel fill hose and vent hose from the fuel tank fill and vent pipe before applying caps to their open ends. Begin by unplugging the fuel system ground strap then take out the fuel tank fill and vent pipe from its placement in the fuel filler pocket. Begin installing the fuel tank fill and vent pipe by placing it inside the fuel filler pocket before tightening bolt thread to 3.5 nm (31 lb in). Secure the fuel fill pipe ground strap by tightening its bolt to 4.0 nm (35 lb in). Connect the vent hose to the fuel tank fill pipe through the opened fuel fill hose by tightening clamps to 3.5 nm (31 lb in). Put in place the left rear wheelhouse liner panel and the fuel filler cap as the final step.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Properly Service and Repair a Fuel Filler Hose on Cadillac XLR? Posted by Customer
    A:
    The first step for Fuel Filler Hose replacement requires the removal of both fuel filler cap and left rear wheelhouse liner panel. Open both the fuel fill hose and vent hose from the fuel tank fill and vent pipe before using a cap to close their ends. Start by disconnecting the fuel system ground strap then take off the fuel tank fill and vent pipe from the fuel filler pocket. The fuel tank fill and vent pipe requires installation into the fuel filler pocket through bolts that need to be tightened to 3.5 n.m (31 lb in). The installation requires connecting the fuel fill pipe ground strap with a bolt torque of 4.0 n.m (35 lb in). Insert the fuel fill hose open end through the fuel tank fill pipe before clamping it tight at 3.5 n.m (31 lb in). Similarly attach the vent hose to the vent pipe opening followed by screwing the fuel fill hose clamp to 3.5 n.m (31 lb in). To complete this procedure end with reinstallation of the left rear wheelhouse liner panel followed by the fuel filler cap.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Replace a Fuel Filler Hose on Chevrolet Corvette? Posted by Customer
    A:
    The first step to replace the fuel filler tube includes unmounting the fuel filler cap as well as the left rear wheelhouse panel. Cap the open ends of both hoses following their disconnection from the fuel tank fill and vent pipe which is also separated from the fuel fill hose along with the vent hose. Start the replacement by separating the fuel system ground strap followed by pulling out the fuel tank fill and vent pipe from the fuel filler pocket. Begin the installation process with fuel tank fill and vent pipe attachment to the fuel filler pocket after bolting them tightly to 3.0 n.m (22 lb in). Secure the fuel fill pipe ground strap by torquing its bolt to 8 n.m (71 lb in). Open the fuel fill hose and vent hose ports before connecting them to the fuel tank fill and vent pipe while tightening the fuel fill hose clamp at 4 n.m (35 lb in). You should install both the left rear wheelhouse panel and the fuel filler cap as the last step.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after removing the left fuel tank for the 2008 Cadillac XLR? Posted by Customer
    A:
    Next, detach the fuel fill hose from the fuel tank and cap the open end of the fuel tank.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Filler Hose
    Q:
    What should be done after detaching the fuel fill hose for the 2005 Cadillac XLR? Posted by Customer
    A:
    Uncap the opening on the fuel tank and install the fuel fill hose back onto it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Filler Hose
    Q:
    What should be done after removing the left fuel tank for the 2008 Chevrolet Corvette? Posted by Customer
    A:
    Detach the fuel fill hose from the fuel tank and cap the open end of the fuel tank.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Filler Hose
    Q:
    What is the first step to replace the fuel filler hose for the 2006 Chevrolet Corvette? Posted by Customer
    A:
    Remove the left fuel tank and detach the fuel fill hose from the fuel tank, capping the open end of the fuel tank afterward.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Filler Hose
    Q:
    How tight should the fuel fill hose clamp be for the 2010 Chevrolet Corvette? Posted by Customer
    A:
    Tighten the fuel fill hose clamp to 4 Nm (35 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Filler Hose
    Q:
    How should the fuel fill hose be secured for the 2007 Chevrolet Corvette? Posted by Customer
    A:
    Ensure to tighten the fuel fill hose clamp to 4 N.m (35 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Filler Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Filler Hose 15814859 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15814859 Filler Hose is available in the market under the name GM Fuel Filler Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15814859 Filler Hose fits certain Chevrolet Corvette models, as well as Cadillac XLR models.
The original GM component designated by manufacturer part number 15814859 maintains top performance when functioning as the Hose, Fuel Tank Filler; Fuel Filler Hose unit. The component 15814859 is constructed from durable material and its dimensions span 10.7 x 6.3 x 4.5 inches while weighing 0.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 15814859 has available replacement options 10349566, 10310050. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.