Make sure this part fits

GM 19420829
Fuel Gauge Sending Unit, Driver Side

2007-2013 GM

Customer Questions & Expert Answers (9)
GM 19420829 Fuel Gauge Sending Unit, Driver Side
GM 19420829 Fuel Gauge Sending Unit, Driver Side
  • Part Description
    Sensor Kit, Fuel Tank Meter/Pump; Fuel Level Sensor; Fuel Sending Unit
  • Position
    Driver Side
  • Replaces
    19149686, 19207710
  • Manufacturer
    General Motors
Make sure this part fits
$81.73 MSRP: $145.93
You Save: $64.20 (44%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number19420829
    Part DescriptionSensor Kit, Fuel Tank Meter/Pump; Fuel Level Sensor; Fuel Sending Unit
    Other NamesLevel Sensor
    Item Weight3.20 Pounds
    PositionDriver Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces19149686, 19207710
    ManufacturerGeneral Motors
    SKU19420829
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2007-2009 Cadillac XLRBase, Platinum, V8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
    2007-2013 Chevrolet Corvette427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR18 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 19420829 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19420829 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the process for installing the new fuel level sensor for the 2007 Cadillac XLR? Posted by Customer
    A:
    Connect the fuel level sensor wires to the internal connector in the correct position, then slide the fuel level sensor into the fuel tank module until the lock tab clicks, ensuring the wires are positioned in the slot below the sensor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Level Sensor
    Q:
    What is the next step after securing the jet line for the 2008 Cadillac XLR? Posted by Customer
    A:
    Remove the tape from the jet line with a connector and ensure each connector is properly latched.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Level Sensor
    Q:
    How do you verify the resistance readings of the fuel pump module for the 2009 Cadillac XLR? Posted by Customer
    A:
    Use a digital multi-meter to verify the resistance readings, ensuring an empty tank reading of 250 ohms and a full tank reading of 40 ohms, with Tech 2 volts of 2.5 V for the empty tank and 0.71 V for the full tank.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Level Sensor
    Q:
    How do you verify the resistance readings of the fuel tank module for the 2008 Cadillac XLR? Posted by Customer
    A:
    Using a digital multimeter, verify the resistance readings of the fuel tank module, ensuring an empty reading of 40 ohms and a full reading of 250 ohms by turning the fuel tank upside down.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Level Sensor
    Q:
    How do you verify the fuel pump module's resistance readings for the 2007 Cadillac XLR? Posted by Customer
    A:
    Use a digital multi-meter to verify the resistance readings of the fuel pump module, ensuring an empty tank reading of 40 ohm resistance and a full tank reading of 250 ohm resistance before reinstalling the left fuel tank.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Level Sensor
    Q:
    What is the first step to replace the Fuel Level Sensor on the right side for the 2007 Chevrolet Corvette? Posted by Customer
    A:
    Remove the module from the fuel tank, ensuring not to handle the level sender on the resistor card to avoid damage from oils.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Level Sensor
    Q:
    What should you do after testing the level sender resistance for the 2008 Chevrolet Corvette? Posted by Customer
    A:
    Install the module back into the tank.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Level Sensor
    Q:
    How do you test the level sender resistance for the 2010 Chevrolet Corvette? Posted by Customer
    A:
    Use an ohmmeter to ensure the empty stop reads 247-253 ohms, the full stop reads 38.5-41.5 ohms, and check for no open circuits along the full sweep.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Level Sensor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 19420829, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 19420829 Fuel Gauge Sending Unit, Driver Side. It is sometimes referred to as GM Fuel Tank Sending Unit, GM Fuel Level Sensor. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 19420829 Fuel Gauge Sending Unit, Driver Side. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery