Make sure this part fits

GM 25699778
Stabilizer Bar Bushing

1997-2005 GM

Customer Questions & Expert Answers (9)
GM 25699778 Stabilizer Bar Bushing
GM 25699778 Stabilizer Bar Bushing
  • Part Description
    Insulator, Stabilizer Shaft; Suspension Stabilizer Bar Bushing Kit; Stabilizer Bushing Kit; Sway Bar Bushing
  • Position
    Front
  • Replaces
    25689665
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2001-2005 Buick LeSabreCustom, Limited6 Cyl 3.8 L GAS
    1997-2005 Buick Park AvenueBase, Ultra6 Cyl 3.8 L GAS
    1998-2004 Cadillac SevilleSLS, STS8 Cyl 4.6 L GAS
    2001-2003 Oldsmobile AuroraBase6 Cyl 3.5 L GAS, 8 Cyl 4.0 L GAS
    2000-2005 Pontiac BonnevilleGXP, SE, SLE, SSEi6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25699778 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25699778 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What do you do with the clamp after removing the bolt for the 2001 Buick Park Avenue? Posted by Customer
    A:
    Bend the open end of the clamp upward and take out the stabilizer shaft and insulator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    Q:
    What is the final step after completing the installation for the 2001 Buick LeSabre? Posted by Customer
    A:
    Lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    Q:
    What should be removed after raising for the 2000 Buick Park Avenue? Posted by Customer
    A:
    The stabilizer shaft clamp bolts and the stabilizer shaft clamp, followed by the stabilizer shaft rubber insulator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    Q:
    What should be done after tightening the bolt for the 2001 Buick LeSabre? Posted by Customer
    A:
    Lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    Q:
    What should be done with the stabilizer shaft bracket bolts for the 2001 Buick Park Avenue? Posted by Customer
    A:
    Ensure to install the stabilizer shaft bracket bolts and tighten them to 47 Nm (35 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    Q:
    How do you secure the stabilizer shaft insulator for the 2001 Cadillac Seville? Posted by Customer
    A:
    Bend the stabilizer shaft bracket downward to secure the insulator, ensuring it nests properly in the clamps; if not, replace the clamps.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    Q:
    What is the procedure for closing the clamp over the stabilizer shaft for the 2000 Cadillac Seville? Posted by Customer
    A:
    Slip the open clamp over the bar, slide it over the insulators, and then bend to close the clamp.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    Q:
    What is the procedure for installation for the 2000 Cadillac Seville? Posted by Customer
    A:
    Loosely install the right and left stabilizer shaft insulators, brackets, and bolts, adhering to the Fastener Notice.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Stabilizer Bar Bushing 25699778 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25699778 Stabilizer Bar Bushing is available in the market under the name GM Sway Bar Bushing. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25699778 Stabilizer Bar Bushing fits certain Cadillac Seville models, as well as Buick LeSabre, Park Avenue. Additionally, it is compatible with Pontiac Bonneville and Oldsmobile Aurora models.
The original GM component designated by manufacturer part number 25699778 maintains top performance when functioning as the Insulator, Stabilizer Shaft; Suspension Stabilizer Bar Bushing Kit; Stabilizer Bushing Kit; Sway Bar Bushing unit at its Front. The component 25699778 is constructed from durable material and its dimensions span 3.8 x 3.2 x 1.5 inches while weighing 0.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Shaft Bushings; Bushing; Bushings. The part 25699778 has available replacement options 25689665. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.