GM 25759231
Stabilizer Bar Bushing

The procedure for Sway Bar Bushing replacement in 2004-2006 cadillac srx involves vehicle elevation followed by wheel removal. The Sway Bar Link needs detachment from the sway bar when removing its retaining nut followed by link separation. Start by unscrewing and extracting both bolts which secure the sway bar bracket alongside the bracket component. Then take away the Sway Bar Bushing. You should place the left-hand bushing onto the sway bar with its slit oriented to the rear and the right-hand bushing should face forward before reattaching the sway bar bracket. Fasten the mounting bolts and use torque pressure of 110 n.m (81 lb ft) to secure them. Fasten the Sway Bar Link to the bar using the retaining nut while tightening it to 115 n.m (95 lb ft). Afterwards install the tires followed by the wheels before lowering the vehicle to the ground.

The procedure of Sway Bar Bushing replacement for 2004-2006 cadillac srx vehicles begins with vehicle lifting and tire wheel removal followed by Sway Bar Link separation from sway bar assembly and sway bar bracket bolt removal. The Sway Bar Link should be separated from the bar by taking off its retaining nut and link. Break down the sway bar bracket through bolting out the mounting bolts and proceed to uninstall the Sway Bar Bushing. Left-hand bushings should be put on sway bars with their slit opening toward the back while right-hand bushings face forward. To finish the operation you must follow the fastener notice instructions when reinstalling the sway bar bracket and tighten its mounting bolts to 110 n.m (81 lb ft). Secure the Sway Bar Link to the sway bar by attaching the retaining nut which requires tightening to 115 n.m (95 lb ft). Carry out the final step by installing tires and wheels before continuing with the vehicle lower-down process.