Make sure this part fits

GM 15231140
Stabilizer Link

2004-2014 GM

Customer Questions & Expert Answers (15)
GM 15231140 Stabilizer Link
  • Part Description
    Link, Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link
  • Position
    Front
  • Replaces
    25768143
  • Manufacturer
    General Motors
Make sure this part fits
$77.32 MSRP: $138.09
You Save: $60.77 (45%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2008-2014 Cadillac CTSBase, Luxury, Performance, Premium6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
    2004-2009 Cadillac SRXBase6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
    2005-2011 Cadillac STSBase, Platinum, V6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15231140 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15231140 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be removed after raising for the 2008 Cadillac CTS? Posted by Customer
    A:
    Remove the tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the next step after removing the tire and wheel for the 2010 Cadillac CTS? Posted by Customer
    A:
    Remove the stabilizer shaft link retaining nuts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the initial step for installing the new stabilizer shaft link for the 2008 Cadillac CTS? Posted by Customer
    A:
    Position the new stabilizer shaft link without tightening the nuts initially.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the first step in the installation process for the 2006 Cadillac SRX? Posted by Customer
    A:
    Attach the stabilizer shaft link to the lower control arm and then to the stabilizer shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    Why is it important to hold the shaft link stud with a hex tool for the 2007 Cadillac STS? Posted by Customer
    A:
    To prevent damage to the link seal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the first step to replace the stabilizer shaft link in the rear suspension for the 2005 Cadillac SRX? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What should be removed first, the upper or lower retaining nut for the 2007 Cadillac SRX? Posted by Customer
    A:
    Remove the upper retaining nut (NPN 123456) first, then the lower retaining nut (NPN 654321).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the first step to replace the stabilizer shaft link in the front suspension for the 2008 Cadillac SRX? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    How should the stabilizer shaft link retaining nuts be installed for the 2006 Cadillac STS? Posted by Customer
    A:
    Install the retaining nuts and tighten them to 90 Nm (67 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the first step to replace the front stabilizer shaft link for the 2005 Cadillac STS? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the next step after holding the shaft link stud for the 2008 Cadillac STS? Posted by Customer
    A:
    Remove the stabilizer shaft link retaining nuts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What should be done again to prevent damage to the link seal during installation for the 2006 Cadillac SRX? Posted by Customer
    A:
    Hold the shaft link studs with the hex tool.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the next step after positioning the new stabilizer shaft link for the 2009 Cadillac SRX? Posted by Customer
    A:
    Install the lower retaining nut, ensuring to follow fastener caution guidelines.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the first step in the installation process for the 2009 Cadillac STS? Posted by Customer
    A:
    Attach the stabilizer shaft link to the lower control arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Stabilizer Link 15231140 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15231140 Stabilizer Link is available in the market under the name GM Sway Bar Link. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15231140 Stabilizer Link fits certain Cadillac CTS, SRX, STS models.
The original GM component designated by manufacturer part number 15231140 maintains top performance when functioning as the Link, Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link unit at its Front. The component 15231140 is constructed from durable material and its dimensions span 9.8 x 6.6 x 3.4 inches while weighing 1.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Link. The part 15231140 has available replacement options 25768143. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.