Other Name: Link Assembly-Rear Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Link; Link, Stabilizer Shaft
Position: Rear Driver Side
Replaces: 15267655
Fits the following Cadillac Models:
CTS | 2008-2015 | Base, Luxury, Performance, Premium, V, Vsport, Vsport Premium | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
Other Name: Link Assembly-Rear Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Link; Link, Stabilizer Shaft
Position: Rear Passenger Side
Replaces: 25768312, 15840472
Fits the following Cadillac Models:
SRX | 2004-2009 | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
STS | 2005-2011 | Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
Other Name: Link Assembly-Rear Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Link Kit; Link; Link, Stabilizer Shaft
Position: Rear
Replaces: 25604388, 25684759
Fits the following Cadillac Models:
DTS | 2006-2011 | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
DeVille | 2000-2005 | Base, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS
Other Name: Link Assembly-Rear Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Link; Link, Stabilizer Shaft
Position: Rear Passenger Side
Replaces: 15267656
Fits the following Cadillac Models:
CTS | 2008-2015 | Base, Luxury, Performance, Premium, V, Vsport, Vsport Premium | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
Other Name: Link Assembly-Rear Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Link; Link, Stabilizer Shaft
Position: Rear
Replaced by: 87848812
Fits the following Cadillac Models:
XT4 | 2019-2023 | Luxury, Premium Luxury, Sport | 4 Cyl 2.0 L GAS
XT5 | 2017-2023 | Base, Livery, Luxury, Platinum, Premium Luxury, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
XT6 | 2020-2024 | Luxury, Premium Luxury, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
Other Name: Link Assembly-Rear Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Link; Link, Stabilizer Shaft
Position: Rear Driver Side
Replaces: 25740518
Fits the following Cadillac Models:
CTS | 2003-2007 | Base, Luxury, Luxury Sport, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
Q: How to replace the rear suspension sway bar link on Cadillac Escalade?
A: The first step to change the sway bar link in the rear suspension involves raising and supporting the vehicle. Start the installation by removing the sway bar link nut along with its bolt from the frame bracket followed by the removal of the sway bar link nut from the ball stud before removing the sway bar link. Start by mounting the sway bar link before you secure the lower link nut because the inner jam nut must reach the bottom of the ball stud; clamp down the stud with appropriate equipment to keep the nut from slipping off when you tighten it. To finish the installation you must begin with the sway bar link nut placed onto the ball stud followed by attaching the sway bar link nut along with its bolt onto the frame bracket. Crank the frame bracket nut against the link to 75 N.m (55 lb ft) while the ball stud gains 75 N.m (55 lb ft) torque when attached to the sway bar and achieve 145 N.m (107 lb ft) nut torque for the sway bar link. Finally, lower the vehicle.
Q: How to replace the front sway bar link on an AWD on Cadillac CTS?
A: Before changing the sway bar link on an AWD vehicle one must raise then support the vehicle. Hold the link studs with the hex tool to avoid link seal damage before you remove the sway bar link retaining nuts from both ends of the link and extract the link from the vehicle. The first step for installation requires placing the new sway bar link without tightening any nuts but you must still use the hex tool to support the link studs. First observe the fastener notice instructions before installing the lower retaining nut then proceed with the upper retaining nut installation. Drive the vehicle down while securing the sway bar link nuts to 125 N.m (92 lb ft).
Q: How to replace the rear suspension sway bar link on Cadillac XLR?
A: The first step to replace a Sway Bar Link in the rear suspension is to raise and support the vehicle followed by tire and wheel removal. You should employ a back up wrench to suspend the link stud during the removal of Sway Bar Link nuts from lower control arms before extracting both links and nuts from the shaft. The installation requires a back up wrench that allows you to install sway bar links and their link nuts to both the sway bar and lower crossmember while tightening Sway Bar Link nuts to 76 n.m (56 lb ft). Reinstallation of tires and wheel assemblies completes the procedure along with lowering the vehicle.