Make sure this part fits

GM 20822934
Stabilizer Link

1997-2013 GM

Customer Questions & Expert Answers (18)
GM 20822934 Stabilizer Link
GM 20822934 Stabilizer Link
  • Part Description
    Link, Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link
  • Position
    Front
  • Replaces
    10254908, 10351954, 10424745, 10423035, 10435298, 15288535, 15907003, 25932329
  • Manufacturer
    General Motors
Make sure this part fits
$35.08 MSRP: $68.67
You Save: $33.59 (49%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2009 Cadillac XLRBase, Platinum, V8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
    1997-2013 Chevrolet Corvette427, 427 Limited Edition Z06, 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Grand Sport, Indianapolis 500 Pace Car, Z06, Z06 Carbon, ZR18 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 20822934 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 20822934 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Service and Repair the Sway Bar Link on a Cadillac XLR? Posted by Customer
    A:
    The first step to replace a rear suspension Sway Bar Link consists of lifting and supporting the vehicle. The first step requires taking off tire and wheel assemblies from the vehicle. The back up wrench should be used to maintain stability during link stud rotation while you remove the Sway Bar Link nuts from the lower control arms and the Sway Bar Link nuts and links from the shaft. The link stud requires a back up wrench for rotation control first before installing sway bar links with link nuts that need to be tightened to 60 nm (44 lb ft) + 30°. To complete the service process users must reinstall the tire and wheel assemblies before lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the rear suspension sway bar link on Cadillac XLR? Posted by Customer
    A:
    The first step to replace a Sway Bar Link in the rear suspension is to raise and support the vehicle followed by tire and wheel removal. You should employ a back up wrench to suspend the link stud during the removal of Sway Bar Link nuts from lower control arms before extracting both links and nuts from the shaft. The installation requires a back up wrench that allows you to install sway bar links and their link nuts to both the sway bar and lower crossmember while tightening Sway Bar Link nuts to 76 n.m (56 lb ft). Reinstallation of tires and wheel assemblies completes the procedure along with lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the rear suspension sway bar link on Chevrolet Corvette? Posted by Customer
    A:
    Starting the rear suspension Sway Bar Link replacement requires vehicle lifting and support. First detach wheel assemblies along with their tires from the vehicle. A back up wrench should be used to hold the link stud stationary while you remove the Sway Bar Link nuts from lower Control Arm locations. Then detach the sway bar together with its links from the shaft. Wrenches are used as back up tools during installation so the link stud does not turn while installing the sway bar links and link nuts to their proper locations on the shaft and crossmember. Tighten Sway Bar Link nuts to 72 nm (53 ft. Lbs.). Reinstall the tire and wheel assemblies followed by lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step after installing the tire and wheel assemblies for the 2000 Chevrolet Corvette? Posted by Customer
    A:
    Lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the final step after securing the stabilizer shaft link for the 2004 Cadillac XLR? Posted by Customer
    A:
    Reinstall the tire and wheel assembly before lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What should be removed after raising the 2007 Cadillac XLR? Posted by Customer
    A:
    The tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the final step after completing the installation for the 2008 Cadillac XLR? Posted by Customer
    A:
    Reinstall the tire and wheel assemblies and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What should be removed after raising the 2009 Cadillac XLR? Posted by Customer
    A:
    The tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the final step after securing the stabilizer shaft link for the 2005 Cadillac XLR? Posted by Customer
    A:
    Reinstall the tire and wheel assembly and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the torque specification for tightening the stabilizer shaft link nuts for the 2001 Chevrolet Corvette? Posted by Customer
    A:
    72 Nm (53 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What should be done after removing the nuts from the lower control arms for the 2003 Chevrolet Corvette? Posted by Customer
    A:
    Remove the stabilizer shaft link nuts and links from the shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the first step to replace the stabilizer shaft link in the front suspension for the 2006 Chevrolet Corvette? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the next step after removing the stabilizer shaft link nuts from the lower control arms for the 2007 Chevrolet Corvette? Posted by Customer
    A:
    Remove the stabilizer shaft link nuts and links from the shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the final step after installation for the 2005 Chevrolet Corvette? Posted by Customer
    A:
    Reinstall the tire and wheel assemblies and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the first step to replace the front stabilizer shaft link for the 2004 Chevrolet Corvette? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What should be removed after raising for the 2010 Chevrolet Corvette? Posted by Customer
    A:
    The tire and wheel assemblies.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the first step to replace the stabilizer shaft link in the rear suspension for the 2008 Chevrolet Corvette? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Stabilizer Link 20822934 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 20822934 Stabilizer Link is available in the market under the name GM Sway Bar Link. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 20822934 Stabilizer Link fits certain Chevrolet Corvette models, as well as Cadillac XLR models.
The original GM component designated by manufacturer part number 20822934 maintains top performance when functioning as the Link, Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link unit at its Front. The component 20822934 is constructed from durable material and its dimensions span 5.4 x 4.9 x 1.3 inches while weighing 0.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Link. The part 20822934 has available replacement options 10254908, 10351954, 10424745, 10423035, 10435298, 15288535, 15907003, 25932329. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.