Make sure this part fits

GM 22601060
Stabilizer Link, Driver Side

1997-2005 GM

Customer Questions & Expert Answers (7)
GM 22601060 Stabilizer Link, Driver Side
GM 22601060 Stabilizer Link, Driver Side
  • Part Description
    Link, Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link
  • Position
    Driver Side
  • Manufacturer
    General Motors
Make sure this part fits
$13.23 MSRP: $26.58
You Save: $13.35 (51%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2005 Chevrolet ClassicBase, LS4 Cyl 2.2 L GAS
    1997-2003 Chevrolet MalibuBase, LS4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
    1999-2004 Oldsmobile AleroGL, GLS, GX4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.4 L GAS
    1997-1999 Oldsmobile CutlassBase, GL, GLS6 Cyl 3.1 L GAS
    1997 Oldsmobile Cutlass SupremeBase6 Cyl 3.1 L GAS
    1999-2005 Pontiac Grand AmGT, GT1, SE, SE1, SE24 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 22601060 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 22601060 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the rear sway bar link on Chevrolet Classic? Posted by Customer
    A:
    The first step to change the rear sway bar link begins with vehicle lifting and proper support. You must detach the rear sway bar link bolt before separating the link from the knuckle. You should remove the link from the sway bar sequence. During installation you should connect the link to the sway bar then join the rear sway bar link with the knuckle while tightening the rear sway bar link to knuckle bolt to 51 Nm (37 ft. lbs.). Finally, lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the order of installation for the new parts for the 2005 Chevrolet Classic? Posted by Customer
    A:
    Begin by placing the spacer, then the insulator, and finally the stabilizer link bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    How should the stabilizer link nut be tightened for the 2002 Chevrolet Malibu? Posted by Customer
    A:
    Tighten the stabilizer link nut onto the stabilizer link bolt until it meets the end of the bolt threads, applying a torque value of 17 Nm (13 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    How do you install the new link for the 2001 Chevrolet Malibu? Posted by Customer
    A:
    Attach the link to the stabilizer shaft, ensuring to follow the Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the torque specification for tightening the rear stabilizer shaft link to knuckle bolt for the 2003 Chevrolet Malibu? Posted by Customer
    A:
    Tighten to 51 Nm (37 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    How should the stabilizer link nut be attached for the 2000 Chevrolet Malibu? Posted by Customer
    A:
    Attach the stabilizer link nut to the stabilizer link bolt and tighten the nut until it meets the end of the bolt threads.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Stabilizer Link, Driver Side 22601060 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 22601060 Stabilizer Link, Driver Side is available in the market under the name GM Sway Bar Link. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 22601060 Stabilizer Link, Driver Side fits certain Chevrolet Malibu, Classic models, as well as Pontiac Grand Am. Additionally, it is compatible with Oldsmobile Cutlass, Alero, Cutlass Supreme models.
The original GM component designated by manufacturer part number 22601060 maintains top performance when functioning as the Link, Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link unit at its Driver Side. The component 22601060 is constructed from durable material and its dimensions span 6.3 x 2.2 x 1.2 inches while weighing 0.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Link. The part 22601060 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.