Make sure this part fits

GM 97363569
Intake Manifold

2006-2007 GM

Customer Questions & Expert Answers (8)
GM 97363569 Intake Manifold
  • Part Description
    Manifold, Engine Fuel Intake Manifold
  • Position
    Center
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2007 Chevrolet Express 2500Base, LS, LT8 Cyl 6.6 L DIESEL
    2006-2007 Chevrolet Express 3500Base8 Cyl 6.6 L DIESEL
    2006 Chevrolet Silverado 2500 HDLS, LT, WT8 Cyl 6.6 L DIESEL
    2007 Chevrolet Silverado 2500 HD ClassicLS, LT, WT8 Cyl 6.6 L DIESEL
    2006 Chevrolet Silverado 3500LS, LT, WT8 Cyl 6.6 L DIESEL
    2007 Chevrolet Silverado 3500 ClassicLS, LT, WT8 Cyl 6.6 L DIESEL
    2006-2007 GMC Savana 2500Base8 Cyl 6.6 L DIESEL
    2006-2007 GMC Savana 3500Base8 Cyl 6.6 L DIESEL
    2006 GMC Sierra 2500 HDSL, SLE, SLT, WT8 Cyl 6.6 L DIESEL
    2007 GMC Sierra 2500 HD ClassicSL, SLE, SLT, WT8 Cyl 6.6 L DIESEL
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Hey, is 97363569 a good match for my vehicle? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 97363569 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the intake manifold for the 2007 Chevrolet Express 2500? Posted by Customer
    A:
    First, remove the throttle body and fuel injectors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be done with the intake manifold gaskets for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Take out the intake manifold gaskets and discard the old ones.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What is the final step in the process for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Route the electrical harness into position over the engine and connect the knock sensor harness electrical connector to the intake manifold, followed by the MAP sensor and knock sensor connectors. Finally, install the fuel injectors and throttle body.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be avoided during the installation process for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Take care to avoid contacting the manifold absolute pressure (MAP) sensor wire harness connector during installation, as this could lead to loss of engine performance or damage.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What is the procedure for reattaching the brake booster vacuum hose for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Reattach the brake booster vacuum hose and clamp, install new intake manifold gaskets (514), and carefully position the intake manifold (500) while ensuring the engine harness is clear.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What is the final step in the process for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Connect the electrical connectors to the right and left side fuel injectors, throttle actuator, ignition coil harness, MAP sensor, and EVAP canister purge solenoid, install the engine harness retainer and nut tightened to 5 N.m (44 lb in), then reinstall the generator and air cleaner outlet duct.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What is the final step in the installation process for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Connect the engine harness clip to the wheelhouse splash shield, connect the engine harness clips to the studs on the front of the dash, connect the fuel feed and return pipes, install the sight shield bracket and nuts tightening them to 5 Nm (44 inch lbs.), install the sight shield to the bracket, snap the intake manifold sight shield to the stud, install the air cleaner outlet duct, and tighten the clamps at the throttle body and air cleaner to 4 Nm (35 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Intake Manifold 97363569 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 97363569 Intake Manifold is available in the market under the name GM Intake Manifold. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 97363569 Intake Manifold fits certain Chevrolet Silverado 2500 HD, Express 2500, Express 3500 models, as well as GMC Sierra 2500 HD, Savana 2500, Savana 3500 models.
The original GM component designated by manufacturer part number 97363569 maintains top performance when functioning as the Manifold, Engine Fuel Intake Manifold unit at its Center. The component 97363569 is constructed from durable material and its dimensions span 6.8 x 5.3 x 5.1 inches while weighing 1.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Manifold. The part 97363569 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.