Make sure this part fits

GM 25840450
Rear Mount

2009-2017 GM

Customer Questions & Expert Answers (4)
GM 25840450 Rear Mount
GM 25840450 Rear Mount
  • Part Description
    Mount, Engine Mount Dampening; Engine Mount Bracket; Motor Mount
  • Position
    Rear
  • Manufacturer
    General Motors
Make sure this part fits
$116.31 MSRP: $198.02
You Save: $81.71 (42%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2009-2017 Buick EnclaveBase, Convenience, CX, CXL, Leather, Premium6 Cyl 3.6 L GAS
    2009-2017 Chevrolet TraverseLS, LT, LTZ, Premier6 Cyl 3.6 L GAS
    2009-2016 GMC AcadiaDenali, SL, SLE, SLT6 Cyl 3.6 L GAS
    2017 GMC Acadia LimitedBase6 Cyl 3.6 L GAS
    2009-2010 Saturn OutlookXE, XR6 Cyl 3.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25840450 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25840450 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the LH Motor and Transmission Mount on Buick Enclave? Posted by Customer
    A:
    Firstly, raise and support the vehicle to replace the left side transmission mount. Referee the left engine splash shield and lift the transmission with a transmission jack. Then, i should remove the transmission mount nuts (1, 2) and the transmission mount bracket bolts (1, 2). With the help of the transmission jack, lift the transmission as much to allow for tilting the transmission mount before removing the transmission mount bracket bolt and take out the transmission mount and bracket from the vehicle. In installing the transmission mount and bracket back onto the vehicle ensure that you install the transmission mount bracket bolt and tighten it to 90 nm (66 lb ft), ensuring that the transmission mount bracket bolt is also tightened to 90 nm (66 lb ft). Lower the transmission down until the bracket of the transmission mount rests under the transmission mount. Next, install the bracket bolt of the transmission mount and tighten it to the 90 nm (66 lbft). Remove the transmission jack and install the transmission mount nut tightened to 75 nm (55 lb ft); install the transmission mount nut tightened to 90 nm (66 lb ft). Lastly, reinstall the left engine splash shield and lower the car.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the LH Motor and Transmission Mount on Chevrolet Traverse? Posted by Customer
    A:
    To remove the left side transmission mount, first, lift and support the vehicle. Remove the left engine splash shield and support the transmission using a transmission jack. Then, you should take off the transmission mount nuts (1, 2) and transmission mount bracket bolts (1, 2). Lift the transmission a small amount as to provide clearance for tilting the transmission mount then loosen and take of the transmission mount bracket bolt and then take off the transmission mount and bracket from the vehicle. For installation, replace the transmission mount and bracket back onto the vehicle ensuring that the transmission mount bracket bolt and tighten it to 90 nm (66 lb ft) and the installation of the transmission mount bracket bolt tighten to 90 nm (66 lb ft). Lower the transmission until the bracket is on top of the mount, then install the transmission mount bracket bolt and tighten to 90 nm (66 lb ft). Replace the transmission jack and install the transmission mount nut tightened to 75 nm (55 lb ft) and the transmission mount nut tightened 90 nm (66 lb ft). Finally, install the left engine splash shield and let go of the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the LH Motor and Transmission Mount on GMC Acadia? Posted by Customer
    A:
    Firstly, raise and support the vehicle to replace the left side transmission mount. Referee the left engine splash shield and lift the transmission with a transmission jack. Then, i should remove the transmission mount nuts (1, 2) and the transmission mount bracket bolts (1, 2). With the help of the transmission jack, lift the transmission as much to allow for tilting the transmission mount before removing the transmission mount bracket bolt and take out the transmission mount and bracket from the vehicle. In installing the transmission mount and bracket back onto the vehicle ensure that you install the transmission mount bracket bolt and tighten it to 90 nm (66 lb ft), ensuring that the transmission mount bracket bolt is also tightened to 90 nm (66 lb ft). Lower the transmission down until the bracket of the transmission mount rests under the transmission mount. Next, install the bracket bolt of the transmission mount and tighten it to the 90 nm (66 lbft). Remove the transmission jack and install the transmission mount nut tightened to 75 nm (55 lb ft); install the transmission mount nut tightened to 90 nm (66 lb ft). Lastly, reinstall the left engine splash shield and lower the car.
    Posted by ChevyPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Rear Mount 25840450 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25840450 Rear Mount is available in the market under the name GM Engine Mount, Motor And Transmission Mount. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25840450 Rear Mount fits certain Chevrolet Traverse models, as well as GMC Acadia, Acadia Limited. Additionally, it is compatible with Buick Enclave and Saturn Outlook models.
The original GM component designated by manufacturer part number 25840450 maintains top performance when functioning as the Mount, Engine Mount Dampening; Engine Mount Bracket; Motor Mount unit at its Rear. The component 25840450 is constructed from durable material and its dimensions span 8.2 x 5.5 x 5.5 inches while weighing 3.00 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Mount. The part 25840450 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.