Make sure this part fits

GM 89043399
Seat Back Pad

2005-2009 GM

Customer Questions & Expert Answers (13)
GM 89043399 Seat Back Pad
  • Part Description
    Pad, Seat Back Cushion
  • Position
    Rear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2005-2009 Chevrolet TrailblazerBase, LS, LT, SS6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2009 GMC EnvoyDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 89043399 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 89043399 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the installation process for the seat cushion assembly for the 2005 Buick Rainier? Posted by Customer
    A:
    Position the seat cushion assembly back into the vehicle and install the 2 nuts that secure it to the floor panel, tightening them to 45 N.m (33 lb ft) as noted in the Fastener Notice.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    How do you begin detaching the seat cover assembly from the seat pan for the 2007 Buick Rainier? Posted by Customer
    A:
    Start at either forward corner, compress the foam, and partially detach the seat cover assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the final step in the replacement process for the 2007 Buick Rainier? Posted by Customer
    A:
    Adjust the seat cushion assembly to the latched position and install the rear mount trim cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    How do you secure the seat pan to the cushion for the 2006 Buick Rainier? Posted by Customer
    A:
    Install the 4 retaining nuts to the studs on the underside of the cushion, tightening them to 25 N.m (18 lb ft), and reinstall the 3 seat switch bezel screws.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the final step in the process for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    Adjust the seat cushion assembly to the latched position and install the rear mount trim cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the next step after removing the rear seat cushion assembly for the 2005 Chevrolet Trailblazer? Posted by Customer
    A:
    Remove the pull handle assembly and the J-strips that secure the rear seat cushion cover to the seat cushion panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    How do you attach the seat belt bezel to the rear seat back for the 2008 Chevrolet Trailblazer? Posted by Customer
    A:
    Use the plastic retainers to attach the seat belt bezel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the torque specification for the rear seat belt anchor bolt for the 2009 GMC Envoy? Posted by Customer
    A:
    Tighten it to 55 Nm (41 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the first step to replace the rear seat cushion for the 2008 GMC Envoy? Posted by Customer
    A:
    Remove the rear seat bracket trim cover and the hydraulic jack from the jack stowage area on the left side only.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the next step after removing the cover and pad for the 2007 GMC Envoy? Posted by Customer
    A:
    Release the 3 hog-rings from the reinforcement bar and remove the seat cover from the pad.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the next step after releasing the J-strips for the 2009 GMC Envoy? Posted by Customer
    A:
    Starting from either forward corner, compress the foam and partially detach the seat cover assembly from the seat pan.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    How do you install the new cover for the 2005 GMC Envoy? Posted by Customer
    A:
    First, attach it to the cushion, then secure the reinforcement bar to the hog-rings, and finally connect the retaining strips to hold the cover in place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Seat Back Pad 89043399 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 89043399 Seat Back Pad is available in the market under the name GM Seat Cushion Pad. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 89043399 Seat Back Pad fits certain Chevrolet Trailblazer models, as well as GMC Envoy. Additionally, it is compatible with Buick Rainier models.
The original GM component designated by manufacturer part number 89043399 maintains top performance when functioning as the Pad, Seat Back Cushion unit at its Rear. The component 89043399 is constructed from durable material while weighing 1.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 89043399 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.