Make sure this part fits

GM 89060217
Brake Pads

2003-2011 GM

Customer Questions & Expert Answers (13)
GM 89060217 Brake Pads
  • Part Description
    Pad Kit, Brake; Disc Brake Hardware Kit
  • Position
    Rear
  • Replaces
    25735537
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2007 Cadillac CTSBase, Luxury, Luxury Sport6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS
    2005-2011 Cadillac STSBase, Platinum, V6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
    2005-2008 Pontiac Grand PrixBase, GT, GTP, GXP6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 89060217 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 89060217 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What tool should be used to compress the caliper pistons for the 2008 Cadillac STS? Posted by Customer
    A:
    Use only a plastic flat-bladed trim tool to compress the caliper pistons into the bores.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What should be done after inspecting the fluid level for the 2006 Cadillac CTS? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    How do you compress the caliper pistons for the 2005 Cadillac CTS? Posted by Customer
    A:
    Use a large C-clamp to compress the caliper pistons by placing the clamp against the rear of the caliper body and the outboard brake pad, tightening it until the pistons are fully retracted.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What are the final steps after reinstalling the tire and wheel assembly for the 2003 Cadillac CTS? Posted by Customer
    A:
    Lower the vehicle, and with the engine off, gradually apply the brake pedal to about two-thirds of its travel, then slowly release it. Repeat this process until a firm brake pedal is achieved, then fill the brake master cylinder reservoir to the proper level and burnish the pads and rotors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What tool should be used to compress the caliper pistons for the 2004 Cadillac CTS? Posted by Customer
    A:
    Use only a plastic flat-bladed trim tool to compress the caliper pistons.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    How do you remove the brake pads from the caliper for the 2007 Cadillac CTS? Posted by Customer
    A:
    Use a plastic flat-bladed trim tool to remove the brake pads from the caliper.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    How many times should the brake pedal be applied for the 2005 Cadillac STS? Posted by Customer
    A:
    Repeat until a firm brake pedal is obtained to properly seat the brake caliper pistons and pads.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What tool should be used to compress the caliper pistons for the 2010 Cadillac STS? Posted by Customer
    A:
    Use only a plastic flat-bladed trim tool to compress the caliper pistons into the bores.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What is the process for compressing the caliper pistons for the 2009 Cadillac STS? Posted by Customer
    A:
    Insert the tool between the rotor and inboard brake pad, applying pressure until both inner pistons are fully compressed, then repeat for the outboard brake pad.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    How do you install the lower caliper guide pin for the 2009 Cadillac STS? Posted by Customer
    A:
    Install the lower caliper guide pin through the caliper and brake pads, seating it with a hammer and punch while ensuring the brake pad retainer is centered.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What should be done after the threadlocker has cured for the 2007 Cadillac STS? Posted by Customer
    A:
    Apply high-temperature silicone lube to the front brake caliper guide pin, install the lower brake caliper pin bolt, and tighten it to 60 N.m (44 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What should be done after removing the brake pads for the 2006 Cadillac STS? Posted by Customer
    A:
    Inspect the retainers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Brake Pads 89060217 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 89060217 Brake Pads is available in the market under the name GM Brake Pad. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 89060217 Brake Pads fits certain Cadillac CTS, STS models, as well as Pontiac Grand Prix models.
The original GM component designated by manufacturer part number 89060217 maintains top performance when functioning as the Pad Kit, Brake; Disc Brake Hardware Kit unit at its Rear. The component 89060217 is constructed from durable material and its dimensions span 10.3 x 4.7 x 3.3 inches while weighing 2.10 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Rear Pads. The part 89060217 has available replacement options 25735537. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.