Make sure this part fits

GM 89039583
Seat Back Pad

2004-2011 GM

Customer Questions & Expert Answers (15)
GM 89039583 Seat Back Pad
  • Part Description
    Pad, Rear Seat Back Cushion
  • Position
    Rear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2011 Chevrolet ColoradoBase, LS, LT, Sport, Sport LS, Z71, Z71 LS, Z85, Z85 LS4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    2004-2011 GMC CanyonSL, SLE, SLT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 89039583 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 89039583 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step regarding the seat belt buckle assembly for the 2010 Chevrolet Colorado? Posted by Customer
    A:
    Remove the bolt securing the seat belt buckle assembly to the seat adjuster.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What should be done after securing the J-strips for the 2006 Chevrolet Colorado? Posted by Customer
    A:
    Reattach the seat belt buckles through the seat cover loops.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What should be done after removing the rear folding seat cushion for the 2009 Chevrolet Colorado? Posted by Customer
    A:
    Next, release the J-strips on the cover and take off the seat cushion cover from the seat frame/pad.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the first step in the installation process for the 2010 Chevrolet Colorado? Posted by Customer
    A:
    Place the seat back heater element, position the seat back pad to the frame, and connect the electrical connector if applicable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the next step after removing the seat back pad for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Install the seat back heater element, position the seat back pad to the frame, and reconnect the electrical connector if applicable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the final step in the process for the 2005 Chevrolet Colorado? Posted by Customer
    A:
    Reinstall the rear folding seat cushion in the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What should be done next if the rear head rest restraints are equipped for the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Take out the rear head rest restraints.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    If equipped, what should be removed next for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Remove the 3 bolts securing the cupholder bracket to the seat frame.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the final step in the process for the 2009 GMC Canyon? Posted by Customer
    A:
    Reinstall the rear bench seat in the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the final step in the installation process for the 2004 GMC Canyon? Posted by Customer
    A:
    Reinstall the seat switch bezel, push the lumbar knob straight onto the shaft, reattach the recliner handle, install the J-strips, secure the cupholder bracket, install the front seat cushion outer trim panel, and finally reinstall the seat in the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    How do you install the new seat cushion cover and pad for the 2007 GMC Canyon? Posted by Customer
    A:
    Place the seat cushion cover and pad over the seat frame, then secure the J-strips on the cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the first step to replace the rear seat cushion cover and pad in a Crew Cab for the 2008 GMC Canyon? Posted by Customer
    A:
    Remove the rear bench seat from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What do you do after releasing the J-strip for the 2010 GMC Canyon? Posted by Customer
    A:
    Remove the seat cushion cover and pad from the seat frame.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What should be done after removing the cupholder for the 2007 GMC Canyon? Posted by Customer
    A:
    Take off the front seat cushion outer trim panel and remove the 3 bolts that secure the cupholder bracket to the seat frame, if equipped.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Seat Back Pad 89039583 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 89039583 Seat Back Pad is available in the market under the name GM Seat Cushion Pad. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 89039583 Seat Back Pad fits certain Chevrolet Colorado models, as well as GMC Canyon models.
The original GM component designated by manufacturer part number 89039583 maintains top performance when functioning as the Pad, Rear Seat Back Cushion unit at its Rear. The component 89039583 is constructed from durable material while weighing 1.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Pad, Seat Back Cushion. The part 89039583 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.