Make sure this part fits

GM 22688928
Filler Neck

1998-2005 GM

Customer Questions & Expert Answers (6)
GM 22688928 Filler Neck
  • Part Description
    Pipe Assembly-Fuel Tank Filler *Math Data; Fuel Tank Filler Neck; Fuel Filler Hose
  • Replaces
    22657947
  • Manufacturer
    General Motors
Make sure this part fits
$42.88 MSRP: $63.80
You Save: $20.92 (33%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2005 Chevrolet ClassicBase, LS4 Cyl 2.2 L GAS
    1998-2003 Chevrolet MalibuBase, LS4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
    1998-1999 Oldsmobile CutlassBase, GL, GLS6 Cyl 3.1 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 22688928 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 22688928 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the fuel filler hose on Chevrolet Classic? Posted by Customer
    A:
    You should begin cargo hose replacement work by plugging fuel system access points with caps until you finish while maintaining system cleanliness. Start the process by taking out the fuel fill cap and draining the Fuel Tank. The work process starts by removing fuel filler pipe retainers through the fuel filler pipe access panel after which the vehicle needs to be lifted. You must loose the Fuel Filler Hose clamps on the Fuel Tank followed by the fuel fill tube before you remove the Fuel Filler Hose. Use an appropriate tool to remove the underbody attaching screw of the fuel filler pipe before extracting the fuel filler pipe. Reinstall the fuel filler pipe while placing it in its correct position and fasten it with the attaching screw that needs 10 n.m (89 lb in) torque. Install the Fuel Filler Hose into position while placing its clamps at the Fuel Tank and fuel fill tube and torques them to 3 n.m (27 lb in). Finish the task by first setting the vehicle at the right height and then securing the fuel filler pipe retainers on the access panel before putting the fuel filler cap back in place.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after draining the fuel tank for the 2002 Chevrolet Malibu? Posted by Customer
    A:
    Raise the vehicle and loosen the fuel filler hose clamp at the fuel tank and at the fuel filler pipe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Filler Hose
    Q:
    What is the torque specification for tightening the fuel tank filler hose clamps for the 2000 Chevrolet Malibu? Posted by Customer
    A:
    Tighten the fuel tank filler hose clamps to 2.5 N.m (22 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Filler Hose
    Q:
    What is the first step to replace the fuel filler hose for the 2003 Chevrolet Malibu? Posted by Customer
    A:
    First relieve the fuel system pressure and drain the fuel tank.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Filler Hose
    Q:
    How do you inspect for fuel leaks for the 2001 Chevrolet Malibu? Posted by Customer
    A:
    Turn the ignition ON for 2 seconds, OFF for 10 seconds, and then ON again, checking for any leaks.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Filler Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Filler Neck 22688928 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 22688928 Filler Neck is available in the market under the name GM Fuel Filler Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 22688928 Filler Neck fits certain Chevrolet Malibu, Classic models, as well as Oldsmobile Cutlass models.
The original GM component designated by manufacturer part number 22688928 maintains top performance when functioning as the Pipe Assembly-Fuel Tank Filler *Math Data; Fuel Tank Filler Neck; Fuel Filler Hose unit. The component 22688928 is constructed from durable material and its dimensions span 36.6 x 6.5 x 4.7 inches while weighing 2.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Filler Pipe; Pipe, Fuel Tank Filler. The part 22688928 has available replacement options 22657947. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.