Make sure this part fits

GM 26045506
Pipe Kit, Passenger Side

1997-2007 GM

Customer Questions & Expert Answers (12)
GM 26045506 Pipe Kit, Passenger Side
  • Part Description
    Pipe Kit, Steering Gear Oil Pressure; Power Steering Hose
  • Position
    Passenger Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2007 Buick RendezvousCX, CX Plus, CXL, CXL Plus, Ultra6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
    1997-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    1997-2004 Oldsmobile SilhouetteBase, GL, GLS, GS, Premiere6 Cyl 3.4 L GAS
    2001-2005 Pontiac AztekBase, GT, Rally6 Cyl 3.4 L GAS
    1999-2005 Pontiac MontanaBase6 Cyl 3.4 L GAS
    1997-1998 Pontiac Trans SportBase, Montana6 Cyl 3.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 26045506 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 26045506 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step in the process for the 2003 Buick Rendezvous? Posted by Customer
    A:
    Reinstall the right side splash panel and bleed the power steering system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be removed from the RH side of the cradle for the 2007 Buick Rendezvous? Posted by Customer
    A:
    The power steering cooler pipe/hose retaining nut and bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How do you remove the cooler pipe for the 2006 Buick Rendezvous? Posted by Customer
    A:
    After disconnecting the wiring harness and removing the retaining bolts, take out the cooler pipe from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after raising the right side of the frame and powertrain with the floor jack for the 2004 Buick Rendezvous? Posted by Customer
    A:
    Install the right side frame-to-body bolts and remove the floor jack.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the next step after removing the inlet pipe/hose for the 2007 Buick Rendezvous? Posted by Customer
    A:
    Remove the inlet pipe/hose from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What are the torque specifications for tightening the fittings for the 2002 Buick Rendezvous? Posted by Customer
    A:
    Tighten the valve end fittings to 16.9 Nm (12.6 ft. lbs.) and the cylinder end fittings to 27 Nm (20 ft. lbs.) when attaching the cylinder line assemblies to the gear assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after tightening the fitting to the steering gear for the 2005 Buick Rendezvous? Posted by Customer
    A:
    Remove the drain pan, lower the vehicle, and install the pressure pipe/hose to the power steering reservoir mounting stud, securing it with the nut tightened to 25 Nm (19 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be placed under the power steering pump and gear for the 2001 Chevrolet Venture? Posted by Customer
    A:
    A drain pan.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What needs to be detached from the power steering gear cooler pipe for the 2001 Chevrolet Venture? Posted by Customer
    A:
    The return hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be removed for access for the 2002 Chevrolet Venture? Posted by Customer
    A:
    Remove the right side engine splash shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be placed under the 2000 Chevrolet Venture? Posted by Customer
    A:
    A drain pan to catch any draining power steering fluid.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Pipe Kit, Passenger Side 26045506 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 26045506 Pipe Kit, Passenger Side is available in the market under the name GM Power Steering Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 26045506 Pipe Kit, Passenger Side fits certain Chevrolet Venture models, as well as Buick Rendezvous. Additionally, it is compatible with Pontiac Aztek, Montana, Trans Sport and Oldsmobile Silhouette models.
The original GM component designated by manufacturer part number 26045506 maintains top performance when functioning as the Pipe Kit, Steering Gear Oil Pressure; Power Steering Hose unit at its Passenger Side. The component 26045506 is constructed from durable material and its dimensions span 20.3 x 6.2 x 2.1 inches while weighing 1.10 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Pressure Line; Line Kit; Line. The part 26045506 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.