Make sure this part fits

GM 26073813
Pipe Kit, Driver Side

1999-2011 GM

Customer Questions & Expert Answers (17)
GM 26073813 Pipe Kit, Driver Side
  • Part Description
    Pipe Kit, Steering Gear Oil Pressure; Power Steering Hose
  • Position
    Driver Side
  • Manufacturer
    General Motors
Make sure this part fits
$11.21 MSRP: $22.93
You Save: $11.72 (52%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2000-2005 Buick LeSabreCustom, Limited6 Cyl 3.8 L GAS
    2006-2011 Buick LucerneCX, CXL, CXL Special Edition6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    1999-2005 Buick Park AvenueBase, Ultra6 Cyl 3.8 L GAS
    2000-2005 Pontiac BonnevilleGXP, SE, SLE, SSEi6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 26073813 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 26073813 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the P/S Return Line for the 2000 Buick Park Avenue? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after securing the inlet hose for the 2009 Buick Lucerne? Posted by Customer
    A:
    Clean any excess power steering fluid from the vehicle, remove the drain pans, and finally, fill and bleed the power steering system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be removed on the frame for the 2001 Buick LeSabre? Posted by Customer
    A:
    The power steering return hose retainers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the torque specification for connecting the power steering pressure hose fitting to the power steering pump for the 2010 Buick Lucerne? Posted by Customer
    A:
    Tighten it to the same specification of 34 Nm (25 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How do you install the new power steering line for the 2000 Buick Park Avenue? Posted by Customer
    A:
    Position the hoses in place, then install the power steering line to the pump, tightening it to 27 Nm (20 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after connecting the power steering pressure hose for the 2007 Buick Lucerne? Posted by Customer
    A:
    Reinstall the power steering hose retainer to the engine frame and secure the power steering pressure hose into the retainer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be removed after raising for the 2001 Buick Park Avenue? Posted by Customer
    A:
    Remove the steering gear heat shield and install a drain pan under the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done with the power steering pressure hose after securing it for the 2001 Buick LeSabre? Posted by Customer
    A:
    Secure it into the retainer and reattach the steering gear heatshield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after connecting the power steering line for the 2000 Buick LeSabre? Posted by Customer
    A:
    Install the retainers and bolts, tightening the retainer bolts to 6 Nm (53 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the first step to replace the Power Steering Pressure Pipe/Hose (RPO L26) for the 2006 Buick Lucerne? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How do you connect the hose to the power steering pump for the 2005 Buick LeSabre? Posted by Customer
    A:
    Connect the hose to the power steering pump and tighten it to 30 Nm (22 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after removing the power steering pressure hose for the 2008 Buick Lucerne? Posted by Customer
    A:
    Remove the power steering pressure hose from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after reinstalling the heat shield for the 2004 Buick Park Avenue? Posted by Customer
    A:
    Lower the vehicle, bleed the power steering system, and check for any leaks in the system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the first step to replace the power steering return hose with RPO L26/3.8L for the 2008 Buick Lucerne? Posted by Customer
    A:
    First, raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How do you connect the hose to the power steering pump for the 2005 Buick Park Avenue? Posted by Customer
    A:
    Connect the hose to the power steering pump and tighten it to 27 Nm (20 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How do you detach the power steering return hose for the 2004 Buick LeSabre? Posted by Customer
    A:
    Disconnect it from the power steering gear and the power steering pump.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Pipe Kit, Driver Side 26073813 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 26073813 Pipe Kit, Driver Side is available in the market under the name GM Power Steering Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 26073813 Pipe Kit, Driver Side fits certain Buick LeSabre, Lucerne, Park Avenue models, as well as Pontiac Bonneville models.
The original GM component designated by manufacturer part number 26073813 maintains top performance when functioning as the Pipe Kit, Steering Gear Oil Pressure; Power Steering Hose unit at its Driver Side. The component 26073813 is constructed from durable material while weighing 0.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Line Kit. The part 26073813 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.