Make sure this part fits

GM 12710208
Water Pump

2004-2015 GM

Customer Questions & Expert Answers (10)
GM 12710208 Water Pump
  • Part Description
    Pump Kit-Water
  • Replaces
    12681186, 19303456, 89017457, 12686762, 89018052, 89017592, 19434778
  • Manufacturer
    General Motors
Make sure this part fits
$296.42 MSRP: $575.31
You Save: $278.89 (49%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number12710208
    Part DescriptionPump Kit-Water
    Other NamesWater Pump Assembly; Pump Kit, Engine Coolant
    Item Dimensions9.7 x 22.3 x 16.6 inches
    Item Weight11.00 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces12681186, 19303456, 89017457, 12686762, 89018052, 89017592, 19434778
    ManufacturerGeneral Motors
    SKU12710208
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Cadillac CTSV8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
    2014-2015 Chevrolet CamaroZ/288 Cyl 7.0 L GAS
    2005-2008 Chevrolet Corvette427 Limited Edition Z06, Base, Z068 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
    2008-2009 Pontiac G8GT, GXP8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 12710208 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12710208 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you retain the water pump pulley for the 2007 Cadillac CTS? Posted by Customer
    A:
    Utilize the Water Pump Pulley Holding Tool (EN 46104) to retain the water pump pulley.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Water Pump
    Q:
    What should be done with the water pump and seal for the 2004 Cadillac CTS? Posted by Customer
    A:
    Take out the water pump and seal, ensuring not to reuse the seal, then clean the mating surfaces and inspect the water pump.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Water Pump
    Q:
    How should the pulley bolts be tightened for the 2005 Cadillac CTS? Posted by Customer
    A:
    Use the EN 46104 Water Pump Pulley Holding Tool (EN 46104) to retain the pulley while tightening the pulley bolts to 12 Nm (106 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Water Pump
    Q:
    What should you do after installing the afterboil coolant pump for the 2004 Cadillac CTS? Posted by Customer
    A:
    Connect the afterboil coolant pump electrical connector to the afterboil coolant pump, then connect the hose to the afterboil coolant pump.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Water Pump
    Q:
    What is the first step to replace the water pump for the 2006 Cadillac CTS? Posted by Customer
    A:
    First, drain the cooling system and remove the generator and water pump drive belt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Water Pump
    Q:
    What is the installation process for the new water pump for the 2005 Chevrolet Corvette? Posted by Customer
    A:
    Place the water pump and gaskets onto the engine block, ensuring to install the water pump bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Water Pump
    Q:
    What should be reattached after installing the water pump for the 2006 Chevrolet Corvette? Posted by Customer
    A:
    Reattach the heater inlet and surge tank outlet hoses, positioning their clamps, followed by the inlet and outlet hoses and their clamps.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Water Pump
    Q:
    What should be done after removing the air cleaner intake duct for the 2008 Chevrolet Corvette? Posted by Customer
    A:
    Drain the cooling system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Water Pump
    Q:
    How do you drain the cooling system for the 2007 Chevrolet Corvette? Posted by Customer
    A:
    Drain the cooling system using Draining and Filling Cooling System (GE 47716) Draining and Filling Cooling System (Static Fill).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Water Pump
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 12710208, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 12710208 Water Pump. It is sometimes referred to as GM Water Pump. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 12710208 Water Pump. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery