Make sure this part fits

GM 19129862
Upper Hose

2005-2007 GM

Customer Questions & Expert Answers (5)
GM 19129862 Upper Hose
  • Part Description
    Hose, Radiator Inlet; Multi Purpose Hose; Radiator Hose; Cooling Hose
  • Position
    Upper
  • Replaces
    89023411
  • Manufacturer
    General Motors
Make sure this part fits
$2.04 MSRP: $3.03
You Save: $0.99 (33%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number19129862
    Part DescriptionHose, Radiator Inlet; Multi Purpose Hose; Radiator Hose; Cooling Hose
    Other NamesHose, Radiator Inlet (Upper)
    Item Dimensions14.6 x 6.2 x 3.2 inches
    Item Weight2.30 Pounds
    PositionUpper
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces89023411
    ManufacturerGeneral Motors
    SKU19129862
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2006 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS
    2005-2006 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS
    2005-2006 Pontiac MontanaSV66 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2005-2007 Saturn Relay1, 2, 36 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 19129862 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19129862 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the radiator hose inlet on Buick Terraza? Posted by Customer
    A:
    The first step to replace the radiator inlet hose includes draining the cooling system liquid. The left diagonal portion of the brace needs to be removed first. The hose clamp pliers (J 38185 (SA9111E)) should be used to provide gentle pressure on the hose clamp until it locks before the radiator inlet hose can be removed from the radiator. Use hose clamp pliers (J 38185 (SA9111E)) once more to reduce clamp tension on the Thermostat Housing until it stops and remove the radiator inlet hose. To begin the installation process connect the Radiator Hose to the thermostat manifold followed by unlocking the clamp retention mechanism at the specific housing with a small flat-bladed screwdriver. Fit the radiator inlet hose to the Thermostat Housing while opening the hose clamp with the small flat-bladed screwdriver. After fitting the hose clamp at the radiator you can start the installation process. Install the left side diagonal brace and fill up the cooling system at the end of work.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the radiator hose outlet on Chevrolet Uplander? Posted by Customer
    A:
    The first task before removing the Radiator outlet hose is draining the cooling system. The hose clamp pliers (J 38185 (SA9111E)) should be used to relax the hose clamp tension at the Water Pump before the Radiator outlet hose can be pulled away from the Water Pump. Put the vehicle onto a safe support equipment for lifting. The hose clamp pliers (J 38185 (SA9111E)) will help you unlock the Radiator hose clamp until it locks before you can remove the Radiator outlet hose from the Radiator. To install the outlet hose place it on the Radiator then unlock the hose clamp retention through small flat-bladed screwdriver use at the Radiator. The Radiator outlet hose installation process begins by lowering the vehicle after which you can fasten the hose between the Radiator and Water Pump using a small flat-bladed screwdriver. Finally, fill the cooling system.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after installing the hose to the radiator for the 2006 Buick Terraza? Posted by Customer
    A:
    Lower the vehicle and install the radiator outlet hose to the water pump.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Radiator Hose
    Q:
    What is the next step after removing the hose from the radiator for the 2005 Chevrolet Uplander? Posted by Customer
    A:
    Use the Hose Clamp Pliers (J 38185 (SA9111E)) again to release tension on the hose clamp at the thermostat housing until it locks, allowing for the removal of the radiator inlet hose from the thermostat housing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Radiator Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 19129862, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 19129862 Upper Hose. It is sometimes referred to as GM Cooling Hose, GM Radiator Hose. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 19129862 Upper Hose. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery