Make sure this part fits

GM 89023434
Upper Hose

2004-2010 GM

Customer Questions & Expert Answers (25)
GM 89023434 Upper Hose
GM 89023434 Upper Hose
  • Part Description
    Hose, Radiator Inlet; Multi Purpose Hose; Radiator Hose; Cooling Hose
  • Position
    Upper
  • Replaces
    25974695
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2009 Cadillac SRXBase8 Cyl 4.6 L GAS
    2005-2010 Cadillac STSBase, Platinum8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 89023434 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 89023434 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done before installing the new radiator outlet hose for the 2007 Cadillac STS? Posted by Customer
    A:
    Lubricate the inside diameters of the hoses with clean coolant.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Radiator Hose
    Q:
    How do you remove the radiator inlet hose for the 2008 Cadillac SRX? Posted by Customer
    A:
    Remove the radiator inlet hose from the thermostat housing, followed by the radiator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Radiator Hose
    Q:
    What is the next step after separating the hose from the retaining features for the 2007 Cadillac SRX? Posted by Customer
    A:
    Compress the clamp and remove the surge tank outlet hose from the heater hose, then take the surge tank outlet hose/pipe out of the engine compartment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What is the first step in the installation process for the 2005 Cadillac SRX? Posted by Customer
    A:
    Position the surge tank outlet hose/pipe to the engine.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What is the first step to replace the radiator inlet hose for the 2007 Cadillac SRX? Posted by Customer
    A:
    First, drain the coolant.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Radiator Hose
    Q:
    What is the final step after installing the radiator outlet hose for the 2005 Cadillac SRX? Posted by Customer
    A:
    Install the radiator outlet hose to the engine support bracket, reinstall the radiator inlet hose, and fill the cooling system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Radiator Hose
    Q:
    What should be done after removing the radiator inlet hose from the thermostat housing for the 2009 Cadillac SRX? Posted by Customer
    A:
    Repeat the process to remove the hose from the radiator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Radiator Hose
    Q:
    What should be removed from the coolant inlet pipe for the 2006 Cadillac SRX? Posted by Customer
    A:
    Remove the wiring harnesses.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What is the final step to complete the installation for the 2005 Cadillac STS? Posted by Customer
    A:
    Compress the clamp to attach the surge tank outlet hose to the surge tank, reinstall the fuel injector sight shield, and fill the cooling system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What should be disconnected from the coolant pipe for the 2008 Cadillac SRX? Posted by Customer
    A:
    Disconnect the radiator outlet hose from the coolant pipe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What should be followed to prevent damage during installation for the 2004 Cadillac SRX? Posted by Customer
    A:
    Follow the correct tightening sequence and specifications.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What should be done after connecting the radiator outlet hose for the 2007 Cadillac STS? Posted by Customer
    A:
    Install the wiring harnesses to the coolant inlet pipe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What is the first step to replace the surge tank outlet hose/pipe (LY7) for the 2007 Cadillac STS? Posted by Customer
    A:
    First, drain the cooling system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What is the next step after removing the surge tank outlet hose/pipe from the engine for the 2008 Cadillac STS? Posted by Customer
    A:
    Position the surge tank outlet hose/pipe to the engine for installation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What should be done after removing the outlet hose from the surge tank for the 2009 Cadillac STS? Posted by Customer
    A:
    Loosen the bolt on the bracket securing the surge tank outlet hose to the engine.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What is the first step to replace the radiator inlet hose (LY7) for the 2007 Cadillac STS? Posted by Customer
    A:
    First, drain the coolant.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Radiator Hose
    Q:
    What is the first step to replace the radiator inlet hose (LY7) for the 2006 Cadillac SRX? Posted by Customer
    A:
    First, drain the coolant.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Radiator Hose
    Q:
    How do you remove the radiator inlet hose from the throttle body housing for the 2005 Cadillac STS? Posted by Customer
    A:
    Use the Hose Clamp Pliers (J38185) to disengage the tension on the hose clamp and remove the hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Radiator Hose
    Q:
    What is the first step to replace the radiator outlet hose for the 2010 Cadillac STS? Posted by Customer
    A:
    First, drain the coolant.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Radiator Hose
    Q:
    How do you secure the new radiator inlet hose for the 2008 Cadillac STS? Posted by Customer
    A:
    Use the Hose Clamp Pliers (J 38185) to engage the hose clamp and secure the radiator inlet hose to the radiator, then slide the clamp into the original position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Radiator Hose
    Q:
    What should be removed after raising for the 2009 Cadillac SRX? Posted by Customer
    A:
    Remove the coolant pipe to generator bracket bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    Where do you remove the radiator inlet hose from for the 2009 Cadillac STS? Posted by Customer
    A:
    Remove the radiator inlet hose from the thermostat housing, followed by the radiator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Radiator Hose
    Q:
    How do you install the radiator inlet hose to the radiator for the 2004 Cadillac SRX? Posted by Customer
    A:
    Use the Hose Clamp Pliers (J 38185) to engage the tension on the hose clamp and slide the clamp into the original position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Radiator Hose
    Q:
    How should the surge tank inlet hose be positioned for the 2004 Cadillac SRX? Posted by Customer
    A:
    It should be positioned correctly to the retaining feature of the air cleaner assembly and routed under the hood assist rod support.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Upper Hose 89023434 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 89023434 Upper Hose is available in the market under the name GM Cooling Hose, Radiator Hose, Coolant Pipe. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 89023434 Upper Hose fits certain Cadillac SRX, STS models.
The original GM component designated by manufacturer part number 89023434 maintains top performance when functioning as the Hose, Radiator Inlet; Multi Purpose Hose; Radiator Hose; Cooling Hose unit at its Upper. The component 89023434 is constructed from durable material and its dimensions span 14.4 x 10.8 x 7.0 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hose, Radiator Inlet (Upper). The part 89023434 has available replacement options 25974695. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.