Make sure this part fits

GM 12506775
Lock Cylinder

1991-2002 GM

Customer Questions & Expert Answers (7)
GM 12506775 Lock Cylinder
  • Part Description
    Cylinder; Trunk Lock Cylinder; Door Lock Cylinder
  • Position
    Rear
  • Manufacturer
    General Motors
Make sure this part fits
$6.79 MSRP: $10.10
You Save: $3.31 (33%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Vehicle Fitment

    Year Make Model Trim Engine
    1991-1996 Chevrolet BerettaBase, GT, GTZ, Z264 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 3.1 L GAS
    1993-2002 Chevrolet CamaroBase, Indianapolis 500 Pace Car, RS, Z28, Z28 SS6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
    1995-2001 Chevrolet LuminaBase, LS, LTZ6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
    1995-1999 Chevrolet Monte CarloLS, Z346 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
    1993-2002 Pontiac FirebirdBase, Formula, Trans Am, Trans Am GT6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12506775 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12506775 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Properly Align and Install a Trunk Lock Cylinder on Chevrolet Camaro? Posted by Customer
    A:
    Firstly, open the window panel before replacing the lift gate lock cylinder. When removing the rear end finish panel for Chevrolet and the taillamp filler for Pontiac just pull the panel off. Then, unbolt the four rivets and pull out the lock cylinder. When putting in the new lock cylinder, the tan dot should be facing upward. Guide the lock cylinder shaft through the hole in the rear end panel up to the hole in the lock support and align the lock cylinder. Install the left rivet followed by the right rivet . For Pontiac vehicles, reinstall the tail lamp filler while for Chevrolet vehicles, reinstall the rear end finish panel.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Trunk Lock Cylinder on Chevrolet Camaro? Posted by Customer
    A:
    To update the lift gate lock cylinder begin by opening your window panel and taking off the rear end finish panel. Afterward remove the seven rivets before pulling out the lock cylinder. During cylinder installation keep the tan indicator facing upward. Feed the lock cylinder shaft through the hole in the panel and lock support until you align the cylinder then place both right and left rivets. Reposition the rear end finish panel during the last step.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the rear Trunk Lock Cylinder on Chevrolet Lumina? Posted by Customer
    A:
    Start the replacement process by taking off the rear compartment lid applique. Start by cutting the rivet then removing both the rear compartment lock cylinder and its gasket. Place the rear compartment lock cylinder and gasket onto the rear compartment lid by setting them in position so the lock cylinder shaft hits its specific space. Insert the rivet last and put back the rear compartment lid applique.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the door lock cylinder for the 2001 Chevrolet Camaro? Posted by Customer
    A:
    Raise the window and remove the front side door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Cylinder
    Q:
    How do you detach the lock cylinder rod for the 2002 Chevrolet Camaro? Posted by Customer
    A:
    Detach it from the lock cylinder pawl clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Cylinder
    Q:
    What should be done after placing the lock cylinder gasket for the 2000 Chevrolet Lumina? Posted by Customer
    A:
    Install the lock cylinder and secure it with the lock cylinder retainer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Cylinder
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lock Cylinder 12506775 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12506775 Lock Cylinder is available in the market under the name GM Door Lock Cylinder, Trunk Lock Cylinder. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12506775 Lock Cylinder fits certain Chevrolet Camaro, Beretta, Lumina models, as well as Pontiac Firebird models.
The original GM component designated by manufacturer part number 12506775 maintains top performance when functioning as the Cylinder; Trunk Lock Cylinder; Door Lock Cylinder unit at its Rear. The component 12506775 is constructed from durable material and its dimensions span 3.7 x 1.6 x 1.6 inches while weighing 0.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Cylinder Kit, Rear Compartment Or Tailgate Lock Cylinder; Cylinder, Rear Compartment Or Tailgate Lock Cylinder. The part 12506775 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.