Make sure this part fits

GM 19209597
Buckle

2004-2012 GM

Customer Questions & Expert Answers (18)
GM 19209597 Buckle
  • Part Description
    Belt Kit, Seat Belt
  • Position
    Rear Center
  • Manufacturer
    General Motors
Make sure this part fits
$25.50 MSRP: $37.96
You Save: $12.46 (33%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2012 Chevrolet ColoradoBase, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    2004-2012 GMC CanyonSL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19209597 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19209597 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is important to ensure while routing the seat belt webbing for the 2006 Chevrolet Colorado? Posted by Customer
    A:
    Ensure to route the rear center seat belt webbing up through the guide loop without twisting it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What should be reinstalled after routing the seat belt webbing for the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Reinstall the body rear trim panel followed by the rear seat shoulder belt guide cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What should be done after removing the trim panels for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Take out the bolt that secures the rear center seat belt assembly to the floor panel and then remove the assembly from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What should be done after attaching the upper guide for the 2004 Chevrolet Colorado? Posted by Customer
    A:
    Replace the rear seat belt upper guide shoulder bolt trim cover, reinstall the body rear corner trim panel, and finally, install the rear seat belt anchor bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What should be removed after the body rear corner trim panel for the 2009 Chevrolet Colorado? Posted by Customer
    A:
    Remove the front seat belt anchor bolt and disconnect the electrical connector from the retractor/pretensioner.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What should be done with the rear center seat belt webbing during installation for the 2004 Chevrolet Colorado? Posted by Customer
    A:
    Route the rear center seat belt webbing up through the guide loop, making sure it is not twisted.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    How do you install the new front seat belt assembly for the 2010 Chevrolet Colorado? Posted by Customer
    A:
    Position the rear seat belt retractor/pretensioner assembly to the vehicle, ensuring to follow fastener cautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the first step to replace the center front seat belt for the 2006 Chevrolet Colorado? Posted by Customer
    A:
    First, remove the rear inboard seat bolt from the passenger seat and take out the grommet that secures the center seat belt assembly to the seat adjuster.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What should be done after positioning the retractor/pretensioner assembly for the 2005 Chevrolet Colorado? Posted by Customer
    A:
    Install the bolt retaining the seat belt retractor/pretensioner assembly to the body, tightening it to 52.5 N.m (39 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    How should the bolt for the retractor/pretensioner assembly be tightened for the 2010 GMC Canyon? Posted by Customer
    A:
    Install the bolt to retain the assembly to the body and tighten it to 52.5 Nm (39 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    Why is it important to inspect and repair the seat belt system after a collision for the 2004 GMC Canyon? Posted by Customer
    A:
    It is crucial to ensure safety.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the next step after removing the retractor/pretensioner assembly for the 2006 GMC Canyon? Posted by Customer
    A:
    Take out the front seat belt assembly from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What should be removed after disabling the SIR system for the 2005 GMC Canyon? Posted by Customer
    A:
    Open the front seat belt upper guide shoulder bolt trim cover and remove the front seat belt upper guide shoulder bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the first step to replace the front seat center belt for the 2008 GMC Canyon? Posted by Customer
    A:
    Remove the rear inboard seat bolt from the passenger seat.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What should be done after removing the grommet for the 2009 GMC Canyon? Posted by Customer
    A:
    Remove the center seat belt assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What should be done after removing the rear inboard seat bolt for the 2007 GMC Canyon? Posted by Customer
    A:
    Take out the grommet securing the center seat belt assembly to the seat adjuster.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What should be done after removing the trim panels for the 2009 GMC Canyon? Posted by Customer
    A:
    Take out the bolt that secures the rear center seat belt assembly to the floor panel and then remove the assembly from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Buckle 19209597 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19209597 Buckle is available in the market under the name GM Seat Belt. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19209597 Buckle fits certain Chevrolet Colorado models, as well as GMC Canyon models.
The original GM component designated by manufacturer part number 19209597 maintains top performance when functioning as the Belt Kit, Seat Belt unit at its Rear Center. The component 19209597 is constructed from durable material and its dimensions span 10.7 x 5.3 x 4.6 inches while weighing 1.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Latch; Belt Kit, Rear Jump Seat. The part 19209597 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.