Make sure this part fits

GM 88956919
Buckle End

2003-2007 GM

Customer Questions & Expert Answers (12)
GM 88956919 Buckle End
  • Part Description
    Belt Kit, Rear Seat Center (Buckle Side) *Medium Neutral*Neutral
  • Position
    Rear Center
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2007 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicLS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2003-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L GAS
    2003-2007 Chevrolet Silverado 2500 HDBase, LS, LT, LTZ, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 2500 HD ClassicLS, LT, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2003-2006 Chevrolet Silverado 3500Base, LS, LT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 3500 ClassicLS, LT, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 3500 HDLT, LTZ, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 88956919 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 88956919 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What must be done if a seat belt system was in use during a serious collision for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    It must be replaced if it deployed automatic restraint devices like air bags and seat belt pretensioners.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    Should the seat belt system be replaced if only the child seat caution label is visible for the 2005 Chevrolet Silverado 1500? Posted by Customer
    A:
    No, do not replace it in that case.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the next step after removing the latch assembly for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Remove the center front seat belt buckle bolt and detach the buckle assembly from the seat.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the first step in the installation process of the new seat belt for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Install the bolt to the seat belt anchor and tighten it to 52 N.m (38 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    Is replacement necessary after minor collisions where no automatic restraint device was deployed for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Replacement may not be necessary unless parts are visibly damaged.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    Which seat belt systems need to be replaced after a collision for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Systems used by adults, child restraints, infant carriers, booster seats, LATCH systems, and top tether anchorages.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the torque specification for securing the bolt to the seat belt anchor during installation for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    The bolt should be tightened to 52 N.m (38 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What should be done after removing the latch assembly for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Remove the center front seat belt buckle bolt and take out the buckle assembly from the seat.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What should be checked after installation for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Ensure that the seat belt latch is fully seated in the buckle and retained until purposely released.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    How should the seat belt buckle assembly be installed for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Attach the seat belt buckle assembly to the center front seat, ensuring to follow the Fastener Notice in Service Precautions, and then install the seat belt buckle bolt, tightening it to 53 N.m (39 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the final step after tightening the seat belt components for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Reinstall the J-Clip under the center armrest, followed by the rear seat armrest, and finally, the seat belt guide cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Buckle End 88956919 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 88956919 Buckle End is available in the market under the name GM Seat Belt. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 88956919 Buckle End fits certain Chevrolet Silverado 1500, Silverado 2500 HD, Silverado 2500 models, as well as GMC Sierra 1500, Sierra 2500 HD, Sierra 2500 models.
The original GM component designated by manufacturer part number 88956919 maintains top performance when functioning as the Belt Kit, Rear Seat Center (Buckle Side) *Medium Neutral*Neutral unit at its Rear Center. The component 88956919 is constructed from durable material and its dimensions span 7.2 x 6.9 x 12.1 inches while weighing 1.00 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Latch; Belt Kit, At5 - Rear Center Folding Seat. The part 88956919 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.