Make sure this part fits

GM 19181892
Lap & Shoulder Belt, Rear Center

2004-2012 GM

Customer Questions & Expert Answers (18)
GM 19181892 Lap & Shoulder Belt, Rear Center
  • Part Description
    Belt Kit, Rear Seat Center (Retractor Side) *Ebony *Ebony
  • Position
    Rear Center
  • Replaces
    19169134, 89022602
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2012 Chevrolet ColoradoBase, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    2004-2012 GMC CanyonSL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19181892 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19181892 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after attaching the upper guide for the 2004 Chevrolet Colorado? Posted by Customer
    A:
    Replace the rear seat belt upper guide shoulder bolt trim cover, reinstall the body rear corner trim panel, and finally, install the rear seat belt anchor bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What needs to be disconnected during the replacement process for the 2010 Chevrolet Colorado? Posted by Customer
    A:
    Disconnect the electrical connector from the retractor/pretensioner.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What are the final steps after installing the seat belt assembly for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Reinstall the body rear trim panel and the rear seat shoulder belt guide cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the first step in the installation process for the 2009 Chevrolet Colorado? Posted by Customer
    A:
    Position the rear seat belt retractor/pretensioner assembly to the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    How do you secure the new center seat belt assembly for the 2006 Chevrolet Colorado? Posted by Customer
    A:
    Install the front seat mounting bolt and tighten it to 52.5 N.m (39 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What are the final steps after installing the rear center seat belt assembly for the 2004 Chevrolet Colorado? Posted by Customer
    A:
    Reinstall the body rear trim panel and the rear seat shoulder belt guide cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the first step to replace the center rear seat belt in a crew cab for the 2006 Chevrolet Colorado? Posted by Customer
    A:
    Remove the rear seat shoulder belt guide cover and the body rear trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the next step after securing the seat belt assembly for the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Route the rear center seat belt webbing up through the guide loop, ensuring it is not twisted.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What should be installed after the front seat belt upper guide for the 2005 Chevrolet Colorado? Posted by Customer
    A:
    Install the front seat belt upper guide shoulder bolt trim cover, the lower center pillar trim panel, and the front seat belt anchor bolt, ensuring the seat belt webbing is not twisted, tightening the front seat belt anchor bolt to 52.5 N.m (39 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the final step in the installation process for the 2009 GMC Canyon? Posted by Customer
    A:
    Install the front seat mounting bolt and tighten it to 52.5 Nm (39 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the final step in the installation process for the 2008 GMC Canyon? Posted by Customer
    A:
    Install the front seat mounting bolt and tighten it to 52.5 N.m (39 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the first step for installation for the 2010 GMC Canyon? Posted by Customer
    A:
    Position the rear seat belt retractor/pretensioner assembly to the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the final step in the installation process for the 2007 GMC Canyon? Posted by Customer
    A:
    Tighten the front seat mounting bolt to 52.5 N.m (39 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the next step after connecting the electrical connector for the 2005 GMC Canyon? Posted by Customer
    A:
    Install the front seat belt upper guide with the bolt, ensuring the seat belt webbing is not twisted, and tighten it to 52.5 N.m (39 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What should be done after disabling the SIR system for the 2006 GMC Canyon? Posted by Customer
    A:
    Open the front seat belt upper guide shoulder bolt trim cover and remove the front seat belt upper guide shoulder bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    In cases of minor collisions where no automatic restraint device was deployed, when is replacement necessary for the 2004 GMC Canyon? Posted by Customer
    A:
    Replacement may not be necessary unless parts are found to be torn, worn, or damaged.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the torque specification for securing the assembly for the 2009 GMC Canyon? Posted by Customer
    A:
    Install the bolt to secure the assembly, tightening it to 52.5 Nm (39 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lap & Shoulder Belt, Rear Center 19181892 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19181892 Lap & Shoulder Belt, Rear Center is available in the market under the name GM Seat Belt. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19181892 Lap & Shoulder Belt, Rear Center fits certain Chevrolet Colorado models, as well as GMC Canyon models.
The original GM component designated by manufacturer part number 19181892 maintains top performance when functioning as the Belt Kit, Rear Seat Center (Retractor Side) *Ebony *Ebony unit at its Rear Center. The component 19181892 is constructed from durable material and its dimensions span 10.5 x 5.4 x 4.6 inches while weighing 2.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Center Seat Belt; Belt Kit, Rear Jump Seat; Belt Kit, Seat Belt. The part 19181892 has available replacement options 19169134, 89022602. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.