Make sure this part fits

GM 19181893
Lap & Shoulder Belt, Rear

2004-2012 GM

Customer Questions & Expert Answers (18)
GM 19181893 Lap & Shoulder Belt, Rear
  • Part Description
    Belt Kit, Rear Seat (Retractor Side) *Ebony *Ebony
  • Position
    Rear
  • Replaces
    89024859, 19169135
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2012 Chevrolet ColoradoBase, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    2004-2012 GMC CanyonSL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19181893 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19181893 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the driver or passenger seat belt in a Crew Cab for the 2010 Chevrolet Colorado? Posted by Customer
    A:
    First, disable the SIR system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the final step after completing the installation for the 2005 Chevrolet Colorado? Posted by Customer
    A:
    Finally, enable the SIR system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the next step after removing the rear seat belt anchor bolt for the 2004 Chevrolet Colorado? Posted by Customer
    A:
    Remove the bolt that secures the seat belt retractor assembly to the body.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    How do you install the new rear center seat belt assembly for the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Position the rear center seat belt assembly on the floor panel, then install the bolt to secure it, tightening it to 52.5 N.m (39 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What are the final steps after installing the rear center seat belt assembly for the 2004 Chevrolet Colorado? Posted by Customer
    A:
    Reinstall the body rear trim panel and the rear seat shoulder belt guide cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the next step after connecting the electrical connector for the 2009 Chevrolet Colorado? Posted by Customer
    A:
    Install the front seat belt upper guide with the bolt, ensuring the seat belt webbing is not twisted, and tighten the upper guide bolt to 52.5 Nm (39 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the first step to replace the center rear seat belt in a Crew Cab for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Remove the rear seat shoulder belt guide cover and the body rear trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    How do you secure the new center seat belt assembly for the 2006 Chevrolet Colorado? Posted by Customer
    A:
    Install the front seat mounting bolt and tighten it to 52.5 N.m (39 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is important to ensure while routing the seat belt webbing for the 2006 Chevrolet Colorado? Posted by Customer
    A:
    Ensure to route the rear center seat belt webbing up through the guide loop without twisting it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the final step in the installation process for the 2008 GMC Canyon? Posted by Customer
    A:
    Install the front seat mounting bolt and tighten it to 52.5 N.m (39 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What are the final steps after installing the seat belt assembly for the 2009 GMC Canyon? Posted by Customer
    A:
    Reinstall the body rear trim panel and the rear seat shoulder belt guide cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the first step to replace the driver or passenger seat belt for the 2010 GMC Canyon? Posted by Customer
    A:
    First, disable the SIR system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the final step in the installation process for the 2005 GMC Canyon? Posted by Customer
    A:
    Install the front seat belt anchor bolt, ensuring the seat belt webbing is not twisted, and tighten it to 52.5 N.m (39 lb ft) before enabling the SIR system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What should be disconnected next for the 2006 GMC Canyon? Posted by Customer
    A:
    Disconnect the electrical connector from the retractor/pretensioner.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    How do you install the new center seat belt assembly for the 2009 GMC Canyon? Posted by Customer
    A:
    Position the center seat belt assembly over the rear inboard seat adjuster mounting hole.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What should be done if the words "REPLACE" or "CAUTION" are visible, or if a yellow tag is present for the 2004 GMC Canyon? Posted by Customer
    A:
    The seat belt system must be replaced, but not solely based on a child seat caution label.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What should be done after positioning the center seat belt assembly for the 2007 GMC Canyon? Posted by Customer
    A:
    Install the front seat mounting bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lap & Shoulder Belt, Rear 19181893 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19181893 Lap & Shoulder Belt, Rear is available in the market under the name GM Seat Belt. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19181893 Lap & Shoulder Belt, Rear fits certain Chevrolet Colorado models, as well as GMC Canyon models.
The original GM component designated by manufacturer part number 19181893 maintains top performance when functioning as the Belt Kit, Rear Seat (Retractor Side) *Ebony *Ebony unit at its Rear. The component 19181893 is constructed from durable material and its dimensions span 10.6 x 5.4 x 4.6 inches while weighing 2.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Seat Belt Assembly; Belt Kit, Rear Jump Seat; Belt Kit, Seat Belt; Belt Kit, Deluxe. The part 19181893 has available replacement options 89024859, 19169135. Each vehicle needs 2 units of the part marked as SKU 19181893. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.